Motorcycle Rear Stop and Tail Lights

LED Rear Light Can-Bus Compensator Resistor Lead for motorbikes with CAN-bus electrical system such as the BMW R1200GS which may show an error if a LED tail light is mounted.

• To avoid an error message, this resistor is connected to the rear light.
• Resistor with adaptor cable and 4.7mm or 6.3mm blade connectors. 

This Taiwanese Highsider smart Texas Motorcycle Rear Stop and Tail Light is E-marked and has a built in mounting bracket which is adjustable for angle. It comes in gloss black or chrome, plastic housings. Includes number plate light.

Dimensions

• Lens diameter 45mm
• Housing diameter 55mm
• Depth 85mm
• 12v 21/5w bulb (6v bulb available)
• 3x wires 220mm (9") from exit of bracket to male bullet
• E-Marked

This Highsider smart LED Motorcycle Stop and Tail Light with brake and driving light. The housing comes with a clear, red or smoke lens and two M4 vertical threads for mounting (underneath tails etc), E-marked and road legal.

• Length: 78 mm
• Height: 16 mm
• Depth: 32 mm

Note

• Delivery contents: 1 piece
• Without licence plate light.

This 20mm diameter Highsider smart PIN LED Stop and Tail Light is for building into bodywork, it is fully E-Marked and supplied individually.  It is fitted with a smoked lens.

• Diameter 20mm, depth 15mm
• E-marked
• One supplied

• Width: 21,5 mm
• Height: 8,5 mm
• Depth: 11,5 mm

Last few available reduced from £24.95 each - This Shin Yo Nose LED Motorcycle Stop Tail and Number Plate Light is e-marked and therefore fully road legal.

It is available in either a smoke or clear lens, or a red outer with a clear centre lens.  All light up red when in use.

• Lens diameter 44mm
• Lens overall length 56mm
• Mounting bolts 30mm centres

These Highsider pro STRIPE Rear Stop and Tail Lights are fully e-marked and road legal.  They are available in a smoked, clear or a red lens (all light red).

• Adhesive mounted 3M strips supplied
• Width 54mm, Height 7mm, Depth 15mm
• Black plastic body
• E-marked
• One supplied

The Highsider smart SHORTY 2 PRO has three very bright SMD LEDs and a special lens installed for optimal brightness.

Available in a red or smoke lens..

• Width: 40 mm, Height: 8,5 mm, Depth: 13 mm
• Adhesive-backing
• E-Marked

The smoke or red lens Highsider Little Star-MX Pro is an extremely bright LED tail light designed for almost invisible installation on the motorcycle, quad or scooter.

• E-Marked
• Suitable for vertical or horizontal installation
• Width: 20 mm
• Height: 8.5 mm 
• Depth: 10 mm

This Highsider smart Number One LED Motorcycle Rear Stop and Tail Light is available in either red, clear or smoke lenses and includes number plate illumination.

It is fully e-marked for road use.

This Highsider Micro Bullet LED Motorcycle Stop and Tail Light is built with an aluminium housing, they can be mudguard mounted and come with a 15mm extension stem if extra length is needed.

• Lens 27mm diameter
• M10 mount thread
• Body length 75mm inc. lens
• Supplied individually
• E-marked

Highsider smart Yo LED Stop and Tail Light CUBE-V (vertical use) or CUBE-H (Horizontal use) with 3 SMDs to build into bodywork is fully E-Marked and supplied individually.  It is fitted with a smoked or red (limited availability) lens .

• Vertical fitting - Width 11mm, height 23.5mm, depth 13mm
• Horizontal fitting - Width 27mm, height 10mm, depth 13mm
• E-marked
• One supplied

This Highsider pro Little Number One LED Motorcycle Rear Stop and Tail Light is available in either red, clear or smoke lenses and includes number plate illumination.

It is fully e-marked for road use.

A black metal housing is available here

• Width: 74 mm
• Height: 64 mm
• Depth: 20.5 mm

Highsider pro STRING LED motorbike stop and taillight, red or smoked lenses available, fully road legal and e-marked.

• Dimension: approx. W x H x D = 126 x 9 x 10.5 mm
• Waterproofed
• Adhesive-backing
• E-Marked

Highsider smart Bates Style Motorcycle LED Rear Stop and Tail Light, has a metal housing and adjustable mounting bracket.

Available with chrome or black housing and red or smoked lenses.

• Body diameter 57mm
• Lens diameter 46mm
• Total depth including lens 56mm
• Mount bolt spacing 15mm
• E-Marked

These aluminium housed Highsider STRIPE Rear Stop and Tail Lights are fully e-marked and road legal.  They are available in a smoked, clear or a red lens (all light red).

Please note the HIGHSIDER logo is much much smaller than in the images at approx 10mm across.

• Width 57.5mm, Height 11.2mm, Depth 26.5mm
• Aluminium body
• E-marked
• One supplied

This single Highsider Power LED Custom Mono Rear Stop and Tail Light has an Aluminium surface mount surround and uses a single Power LED to project a bright strong red light.

They are in an anodised black body, with clear lenses and are e-marked for road use.

• Diameter: 18 mm
• depth: 8 mm
• Mounting bolt length: M10 x 13mm 

Matching Indicators

This single Highsider Power LED Custom Mono Bullet Rear Stop and Tail Light has a Aluminium housing and uses a single Power LED to project a bright strong red light.

They are available in either an anodised black or chrome body, both with clear lenses and are e-marked for road use.

• Diameter: 18 mm
• body length: 63 mm
• Stem length: 13 mm
• Bolt: M8 x 1.25 mm length: 19 mm