Save cutting wires by using these indicator adapter leads which convert from OEM plugs to aftermarket bullet connectors.
Selection of spare leads for the Maximiser 360T.
Shrink Sleeve Solder Connector Red 25 Pack for cable cross section from 0.5 to 1.5 mm2..
The simple, fast solution for tension-resistant, moisture-proof cable connections. Simply insert the appropriately stripped cables into the suitable connector and then melt the solder ring with a hot air gun. Then heat the connector with the hot air gun until the adhesive emerges at the ends.
Shrink Sleeve Solder Connector Blue 25 Pack for cable cross section from 1.5 to 2.5 mm2..
Triumph Thruxton 1200 and Thruxton 1200R/RS 2016 onwards Highsider tail tidy adapter cable.
This powerful USB charger has a 2.1amp output suitable for devices such as phones, tablets and sat navs. It is powered from a 12V battery system of a car, motorcycle, boat etc.
This Oxford High Power 3 Amp USB Type A Charging Kit is to seamlessly integrate your choice of USB charger with your motorcycle. Mount your charging port somewhere convenient using the included 3M™ sticky pad then simply run the attached ring leads directly to your battery terminals.
This Oxford High Power 3 Amp USB Type C (small connector) Charging Kit is to seamlessly integrate your choice of USB charger with your motorcycle. Mount your charging port somewhere convenient using the included 3M™ sticky pad then simply run the attached ring leads directly to your battery terminals.
From BikeIt this SAE Power Supply has twin USB outlets being one standard USB one smaller Type-c, it also has an On/Off switch and a battery volts display.
This Weatherproof Dual USB Socket has a 2amp output to enable charging of devices such as phones, tablets mp3 players, Sat Nav etc. by USB lead (not included). Designed for 22-25mm handlebar mounting but can also be mounted on the mirror stem using the unique adapters provided.
The mo.unit battery cable with fuse is the connection cable between each mo.unit and the vehicle battery. It has an integrated main fuse with 40 A maximum current load.
The Motogadget Motorcycle Harness Cable Kit for the m-Unit is a ready-made set of cables to aid in the assembly of a wiring harness.
This Motogadget mo.lock wiring harness allows as a complete solution a very quick and easy installation of the mo.lock NFC into the vehicle electrical system.
Simply plug the relay in the mo.lock delivery kit into the matching relay socket of the cable harness, connect three prepared cables to the mo.lock and connect two ring lugs to the battery terminals - done!
mo.Lock NOT included