These Wunderkind Rear Mudguard Fender Struts have 22mm diameter combined stop tail and indicator light units integrated in the top mount..
Struts are supplied in their raw state unfinished.
Wunderkind products are special order and take approx 7-10 days for delivery..
A conversion of the rear fender usually requires new, reliably accurate struts to give the fender stability. Then the challenge to place indicators and the rear light where they look great and work well, with the cables routed as discreetly as possible.
“We have done all that for you. With nothing to cut or weld, this is a complete conversion kit, right down to the high-grade E-tested LED unit that is seamlessly integrated in to the design at the top of the strut, adjacent to the fender for maximum visibility and a great, clean fully functional look,” says CEO Christian Mehlhorn.
The conversion set for motorcycle rear fender consists of a left-hand and right-hand strut, with a length of approx. 294 mm each as well as of 2 connection jacks for fixing to the swing arm.
Moreover, two CNC-3D milled housings are included in the delivery, black anodized, with integrated LED turn signal/taillight.
-
The housings are clamped on the strut and bolted to the fender on the other side.
-
The LED light unit has an E-approval.
-
The cables are guided invisibly down to the rocker in the struts.
-
Cables for the electrical connection are included in the delivery.
-
Super clean optics, light unit is discreetly integrated into the struts of the fender.
Contents
-
2 x housing for indicator/taillight combination black anodized including LED light e-marked
-
2 x struts high-grade steel raw, length approx. 294 mm
-
2 x sleeve high-grade steel raw, Ø20xØ8,5x20 mm
-
Cable, small parts