The m.unit blue is the digital control unit for a motorcycle, the heart of the entire vehicle electrical system. They can be operated with button taps or with conventional switching handlebar controls. It switches all the necessary components on the vehicle and at the same time it takes over the tasks of electrical fuses.
Relays and individual components in the wiring harness can be greatly reduced and it can be carried out a new, minimized wiring of the vehicle in the shortest possible time.
Compared to the proven previous version (m-unit v.2) this has been evolved and improved significantly. Now you have 12 inputs and 10 outputs, higher quality cable clamps and especially now a Bluetooth® LE (Low Energy) interface.
When using the m.button the number of all switching fitting connectors is reduced to a single cable.
Functions WITHOUT smartphone and m.ride App
Full digital control button, 4-sensor or 5 button operation possible
-
Complete replacement of the fuse box. 10 independent circuits are digitally monitored and switched off when faults. After eliminating the fault, the safety function is automatically reset
-
Integrated, position-independent alarm
-
Integrated, digital, load independent flasher relay switch off feature and adjustable m.wave mode selectable
-
Integrated hazard warning system
-
Indicators can be optionally set as a position light (USA style)
-
integrated parking lights and headlight flasher
-
Control of high and low beam (up to 200 W switching capacity) with just one button
-
Integrated digital brake light modulator, programmable flashing mode
-
Acceleration controlled risk stop lamp (automatic alarm)
-
Integrated starter relay for starter with magnetic switch (up to 30 A switching capacity)
-
Intelligent and configurable control / disconnection of consumers to use the maximum starting power of the battery during the starting process can
-
Integrated digital horn relay
-
Two configurable auxiliary outputs AUX1 and AUX2
-
Diagnostic function for availability of input, output, switching state of the circuit, short-circuit diagnostics, etc.
-
Calibration and current measurement enables defect detection of all bulbs
Functions WITH smartphone and m.ride App
-
Encrypted connection via Bluetooth LE (Low Energy), thus tampering and low power consumption of smartphones and the blue m.unit
-
Keyless ignition (turning the electrical system through rapprochement with the own smartphone)
-
Transmission of alarm events (date, time, vehicle on the ground, etc.) to the app
-
Setting mode and sensitivity of the alarm system
-
Monitoring of the current battery voltage in the app
-
Diagnosis of all inputs and outputs, measurement of currents, voltage, device temperature
-
Error messages in real time as the audio output via the helmet headset.
-
Manual switching of outputs via smartphone (except Starter)
-
Firmware updates without dismantling anywhere via smartphone app
-
Configuration of the setup menu without removing any place via smart phone and App
-
Mileage input for adjustment of the vehicle odometer with m.ride allows vehicle management with automatic on maintenance tasks, condition of tires, chain, brake pads, oils, fuels, spark plugs etc.
-
Log records on rides and displays vehicle status, alarm events and maintenance tasks
-
Display of the parking position and Ping! to help with vehicle search
-
LIN bus connection available for subsequent connection of suitable motogadget products
Items delivered
-
m.unit blue
-
1 x M5 stainless steel screw
-
2 x M5 stainless steel bolt with nut
-
1 x speedo sensor with 2 magnets
-
Detailed installation and operating instructions
11 x control input (negative / earth connected) for:
-
Left indicator
-
Right indicator
-
low / high beams
-
starter
-
horn
-
stoplight
-
Killschalter
-
stand switch
-
LIN bus
-
AUX1
-
AUX2
outputs 10 x output (+ 12V) for:
-
Left turn signal indicator
-
Right turn signal indicator
-
low beam
-
high beam
-
starter
-
horn
-
stoplight
-
ignition
-
AUX1
-
AUX2
