The mo.Relay+ purposefully combines a load independent digital flasher relay and electronic push-button controls.
Depending on how long the respective turn signal push-button is activated, 4 different operating modes are available:
a) Change of lane: Short tap on push-button - blink 3x and automatic switch-off
b) Turn: Pressing push-button shortly - blink 10x and automatic switch-off
c) Continuous flashing: Pressing push-button longer - switching off only after pressing the push-button repeatedly
d) The m-Relay+ is equipped with a hazard flasher function - activated by pressing both push-buttons simultaneously
The m-Relay+ is load independent (1-100 W) and provides a constant flasher frequency to almost all models of LED, micro or halogen turn signal lights as well as 10 or 21 W light bulbs. Immediate, loss free and brighter illumination results from the effective microelectronic.
The light and compact aluminium casing is anodized black and features a M3 mounting thread. Removable mounting with cable ties is also possible. Ideal for mods and custom bikes with restricted mounting space. The electronics are water-tight, vibration resistant and are equipped with an overload protection.
Attention: If you are looking for a flasher relay WITHOUT push-button controls please refer to our m-Flash or m-Wave series!
Attention: If you are looking for a flasher relay WITHOUT push-button controls but with automatic deactivation please refer to our m-Stop series!
Attention: If you are looking for fully featured push-button controls with lots of additional features, please refer to our m-Unit series!
Diameter 19 mm (without cable), height 19 mm
Specifications and features
All advantages summarized
-
very compact, light and easy to mount
-
ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
-
no additional push-button control unit necessary
-
intuitive time control and automatic deactivation
-
almost load independent (min. 1 Watt)
-
completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electrical contacts
-
consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal bulb lights
-
e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights
-
immediate loss free and brighter illumination of all turn signal lights
-
completely water tight and vibration resistant because of the moulded-in construction
-
short circuit proof, automatic overload protection, switches power up to 100 W.
-
no heat generation while operating
-
only 5 - 18 V operating voltage required
-
quality 'made in Germany' - by motogadget