Highsider DRL and Dip Beam Auto Switch Box E~BOX Type 1

The Highsider PW E-BOX TYPE 1 is used in the DRL circuit via a light sensor for automatic switching between daytime running lights and low beam.

The HIGHSIDER PW E-BOX TYPE 1 recognizes when it gets dark or bright, and then automatically turns on the low beam and at the same time the DRL off or dimmed (or vice versa).

Additionally equipped (optional switchable) is the so-called "coming home" function. This makes it possible after switching off the motorcycle in the dark for the daytime running light to stay lit for another 30 Seconds.

There is no need for a switch.

 

A German installation tutorial can be found below which shows an installation on an RnineT

 

• Height: 16 mm
• Width: 56.5 mm
• Width with fastening straps: 75 mm
• Length: 48 mm
• Mounting straps: 3 mm x 11 mm (slot)
• Weight: 0.046 kg
• Cable length: 400
• Cable length light sensor: 600 mm (total)

• Purple / black cable = high beam IN
• Yellow / green cable = parking light IN
• Black cable = ground IN (-)
• Red cable = supply voltage IN (+)
• Blue cable = dipped beam OUT
• Black cable = ground OUT (-)
• Pink cable = parking light OUT
• Orange cable = dipped beam IN
• Gray cable = programming cable
• Green cable = high beam OUT
• Brown cable = daytime running light (TFL)
• Black cable = ground OUT (-)
• White cable = TFL control lamp OUT

• 1 x HIGHSIDER PW E-BOX TYPE 1
• 1 x cable set
• 1 x light sensor
• 1x manual 208-200A