These 5W 12V Glass Cap Wedge Bulbs are 10mm in diameter and 27mm overall length.
Sold individually
Silicon-Power-Diode 5A, (U) 50V, blocking-diode. When adding LED rear tail light / turn signal combinations in addition to bulb original tail lights, it can happen that a small leakage current flows from the brake line, when the Rear light cable is connected or vice versa.
For example we have just had a supplementary LED rear light switch off when the brake light cables are connected.
To prevent this, a 5A blocking diode in series is connected to the brake light cable in a way that the current can flow to the new LED tail light but not back. The silver bar on the diode marks the direction to where the electricity can flow.
A range of Motorcycle 6v or 12v Rear Stop and Tail Light Bulbs 21/5w and 23/8w available..
Individual Motorcycle 12v Indicator Light Bulbs Amber or Clear 15mm base and 23w or 10w available..
All have pins 180 degrees apart and same level on sides.
These 40mm x 90mm Self Adhesive or Screw On Rectangular Red Rear Reflectors are supplied individually and are e-marked.
Halogen BAY9S 12v 21w Indicator Bulb E-Marked are available with short or longer clear glass.
These 20mm self adhesive round rear reflectors come as a pair.
Zieger reflector T-Bracket extension to fix behind your number plate on various tail tidies.
E-marked reflector which is suitable for the Highsider range of tail tidies, rectangular with a reflector surface of 85 x 30 mm.
With an M5 threaded bolt for mounting.
These 20mm round rear reflectors come as a pair and are mounted using an 8mm bolt and wing or butterfly nut.
These HIGHSIDER plastic cover sleeves for M8 indicator mounting bolts come as a pack of 4, after a new indicator installation you can cover the indicator bolts with help of plastic sleeves for a better finish and corrosion protection.
These 22mm x 94mm long amber self adhesive side reflectors come as a pair and are E-marked.
These 22mm x 94mm long red self adhesive rear reflectors come as a pair and are E-marked.
Zieger slim reflector angled T-Bracket extension to fix behind your number plate on various tail tidies.
Indicator winker stem for various HONDA and KAWASAKI motorcycles, supplied individually please order 2 for a pair.
A range of extensions, mount converters and brackets for the Kellermann Atto, Rhombus S & Micro S M5 range of miniature LED Motorcycle Indicators and Stop and Tail Light.
Pairs of motorcycle fairing indicator spacers in bike specific shapes and sizes. These allow you to bridge the gap when replacing bulky original indicators with neater and smaller aftermarket sets.
Please click the image above to go to the detail page for dimensions.
Headlight Lens Retaining W Clips Pack of 3, secures headlight lens to inner of the headlight rim.
Honda CBR1000F 1987-91 Rear Indicators Individually available and priced, fully legal E-Marked.
LED Rear Light Can-Bus Compensator Resistor Lead for motorbikes with CAN-bus electrical system such as the BMW R1200GS which may show an error if a LED tail light is mounted.
This 18mm Diameter Shin Yo Micro Pin LED Motorcycle Front Position Light is designed to be built in to bodywork. It is supplied singularly and has a smoked finish.
Shin-Yo Short Motorcycle LED Number Plate Light ABS Black E-marked with 4 LEDs
Zieger reflector angled T-Bracket extension to fix behind your number plate on various tail tidies.
Matching Reflector
These Shin Yo Oval Mini Motorcycle Indicators are supplied as a pair and they are E-marked
This Motorbike Number Plate Light is available in Chrome or Black, it is fitted with a halogen bulb and is E-marked.
These Shin Yo Oval II Mini Motorcycle Indicators are supplied as a pair and they are E-marked, 12v 10w bulbs fitted with 6v 18w option.
Shin-Yo LED Number Plate Light Bolt finished in Chrome E-marked supplied individually. This is designed to be shock resistant and is fitted with a very bright LED. Aluminium housing.
Shin-Yo Flexible Self Adhesive Motorcycle LED Number Plate Light E-marked black surround
This Shin Yo Mini Motorcycle Rear Stop and Tail Light is fully road legal being e-marked for the stop and tail. It has a black plastic body and includes a number plate light (which is not e-marked).
