ABM Multiclip Tour Clip On Adjustable Sportsbike Clip On Set

This German made pair of universal CNC ABM Multiclip clip-on raisers are infinitely adjustable and extremely light weight (800 grammes) they allow the rider to adjust them to to gain much more comfort compared with standard clip-ons.

Made to order please allow 7-10 days for delivery..

Dimensions of the clamps are shown on the giant image accessed by clicking on the 'enlarge' button above.

They are available in two versions Sport gives a fixed height of approx 40mm rise (over normal clip ons) and Touring gives 30mm of vertical adjustment over and above the sport measured at the fork clamp area, so 40-70mm above standard clip-ons.  This puts the base of your tubes level with or above your top yoke.Extremely high quality German made product.

• For fork diameters 36/38.5/39/41/43/45/48/50/51/53/55/58 mm
• Reduction tubes are available for 35/38/40/52/54/56mm forks 
• Laser scale for symmetric and correct setting in all positions
• Highest safety against twisting by threefold clamp at the fork
• Steering column crank of 3° for optimal fine adjustment
• CNC-milled from high-strength aluminium, shiny black anodized
• Weight approx. 800 g

• Sport version: Height approx.  40 mm above the original handlebar position
• Touring version: Height adjustable approx. 40-70 mm above the original handlebar position
• 50mm Slim version has a lower height fork clamp which is 27mm tall (standard is 39mm) gives a little extra height to clip ons if under the yoke
• 50mm Wide version has a longer clamp with 65mm centres (standard is 51mm) increases overall width of clip-ons

All clamps are 3 screw fitting (apart from slim), some of the pictures above are of the older design..

• Reduction set Ø36 to Ø35 mm = Possible mounting of multiClip/raceClip Ø36 mm on fork tubes with a diameter of 35 mm.
• Reduction set Ø39 to Ø38 mm = Possible mounting of multiClip Ø39 mm on fork tubes with a diameter of 38 mm.
• Reduction set Ø41 to Ø40 mm = Possible mounting of multiClip/raceClip Ø41 mm on fork tubes with a diameter of 40 mm.
• Reduction set Ø53 to Ø52 mm = Possible mounting of multiClip Ø53 mm on fork tubes with a diameter of 52 mm (NOT required with 52mm Slim Clamps).
• Reduction set Ø55 to Ø54 mm = Possible mounting of multiClip/raceClip Ø55 mm on fork tubes with a diameter of 54 mm.
• Reduction set Ø58 to Ø56 mm = Possible mounting of multiClip Ø58 mm on fork tubes with a diameter of 56 mm.