Motor Cycle Accessories
Tel: 01637 880530

Products


 

Our products

Home » All Products
 
Sort Products
Items per Page
Search this page:
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »
5W 12V Glass Cap Wedge Bulb

These 5W 12V Glass Cap Wedge Bulbs are 10mm in diameter and 27mm overall length.

Sold individually

Price: £0.39
Shin Yo
0.44 EUR 0.51 USD
Motorcycle BA15S Indicator Light Bulbs 12v 23w or 10w Amber or Clear

Individual Motorcycle 12v Indicator Light Bulbs Amber or Clear 15mm base and 23w or 10w available..

All have pins 180 degrees apart and same level on sides.

  • BLB06 12v 10w, Base BAY15S, Glass 18.5mm Clear
  • BLB04 12v 23w, Base BAY15S, Glass 18.5mm Clear
  • BLB08 12v 10w, Base BAY15S, Glass 18.5mm Amber
  • BLB31 12v 23w, Base BAY15S, Glass 18.5mm Amber
Price: £0.95
BikeIt
1.06 EUR 1.25 USD
Motorcycle Exhaust to Header Gaskets 26mm to 62mm

These asbestos free Motorcycle Exhaust to Header Gaskets are available in a range of sizes from 26mm to 62mm outside diameter.

  • Sold individually or as a pack of 10
  • Asbestos free
Price: £1.49
BikeTek
1.67 EUR 1.96 USD
Silicon~Power~Diode 5A, (U) 50V, Rear Light Blocking~Diode

Silicon-Power-Diode 5A, (U) 50V, blocking-diode. When adding LED rear tail light / turn signal combinations in addition to bulb original tail lights, it can happen that a small leakage current flows from the brake line,  when the Rear light cable is connected or vice versa. 

For example we have just had an supplementary LED rear light switch off when the brake light cables are connected.

To prevent this, a 5A blocking diode in series is connected to the brake light cable in a way that the current can flow to the new LED tail light but not back. The silver bar on the diode marks the direction to where the electricity can flow.

Price: £1.65
Highsider
1.84 EUR 2.17 USD
Self Adhesive or Screw On Rectangular Rear Reflector

These 40mm x 90mm Self Adhesive or Screw On Rectangular Red Rear Reflectors are supplied individually and are e-marked.

Price: £1.95
Highsider
2.18 EUR 2.57 USD
Halogen BAY9S 12v 21w Indicator Bulb E~Marked with clear glass

Halogen BAY9S 12v 21w Indicator Bulb E-Marked with clear glass.

  • *Please note Offset Pins 120 degrees apart*
Price: £2.49
Shin Yo
2.78 EUR 3.28 USD
Motorcycle Rear Stop and Tail Light Bulbs 12v

A range of Motorcycle  6v or 12v Rear Stop and Tail Light Bulbs 21/5w and 23/8w available..

  • BLB02 12v 21/5w Base BAY15D Glass G18.5 Clear
  • BLB26 12v 21/5w Base T20/7443 Glass G Red
  • BLB27 12v 23/8w Base BAY15D Glass S25 Red
  • BLB30 12v 21/5w Base BAY15D Glass S25 Clear
  • 209-130 6v 21/5w Base BAY15D P21/5w Clear 
Price: £2.49
BikeIt
2.78 EUR 3.28 USD
Motorbike Headlight Bracket Spacers Pair

These Motorbike Headlight Bracket Spacers come as a pair. They are made of black plastic and measure 28mm diameter and 10mm thick. The internal diameter is 10mm.

Price: £2.49
BikeIt
2.78 EUR 3.28 USD
Oxford Minder Motorcycle Disc Lock Reminder Cable

The Oxford Minder Motorcycle Disc Lock Reminder Cable attaches one end to your disc lock and the other to your handlebars.

Saves looking like a plonker in town by forgetting to remove your lock...

Price: £2.84
Oxford Products
3.17 EUR 3.74 USD
3 Pin headlight H4 bulb connector Type A with 210 mm cable
3 Pin headlight H4 bulb connector Type A with 210 mm cable. 
You can use Type A (female) as connector for the H4 halogen bulb on a headlight.
 
Green cable = ground,
Blue cable = plus high beam,
White cable = plus low beam.
 
Delivery contents: 1 piece.
Price: £2.95
Highsider
3.30 EUR 3.88 USD
3 Pin headlight H4 bulb connector Type B with 210 mm cable
3 Pin headlight H4 bulb connector Type B with 210 mm cable. 
You can use Type B (male) as adapter for the original H4 connector from the vehicle wiring loom.
 
Connections:
Green cable= ground
Blue cable = plus high beam
White cable = plus low beam
 
Delivery contents: 1 piece.
Price: £2.95
Highsider
3.30 EUR 3.88 USD
Headlight W Lens Retaining Clips Pack of 3

Headlight Lens Retaining W Clips Pack of 3, secures headlight lens to inner of the headlight rim.

Price: £2.95
BikeIt
3.30 EUR 3.88 USD
5mm LED Motorcycle ATV Dashboard Warning Lights

5mm LED motorcycle or ATV dashboard warning lights, with cable and mounting clip, for 12 volt DC. Amber. red, blue or green colours available.

  • LED diameter 5 mm.
  • Mounting clip: largest diameter 8 mm
  • Please enter number required in boxes below (numerics)
Price: £3.25
Highsider
3.63 EUR 4.28 USD
Motorbike M8 and M10 Mirror Adapters

A selection of Motorbike M8 and M10 Mirror Adapters with left and right hand threads.

Sold individually please order 2 for a pair..

Please click for details..

Price: £3.25
Highsider
3.63 EUR 4.28 USD
HIGHSIDER 4 Cover Sleeves for M8 Indicator Mounting Bolts

These HIGHSIDER plastic cover sleeves for M8 indicator mounting bolts come as a pack of 4, after a new indicator installation you can cover the indicator bolts with help of plastic sleeves for a better finish and corrosion protection.

Delivery contents: 4 pieces
Price: £3.45
Highsider
3.86 EUR 4.54 USD
Oxford 60cm Bumper Motorcycle Accessory Cable Lock
The 60cm Oxford Bumper Cable Lock features a 6mm self-coiling, high tensile steel cable with protective vinyl sleeve. Compact and lightweight allowing it to easily be carried in backpacks.
  • Two keys
  • 6mm High tensile steel, self-coiling cable
  • Vinyl coated to protect paintwork
  • 60cm cable is compact and lightweight
Price: £3.45
Oxford Products
3.86 EUR 4.54 USD
Kellermann Atto Indicators and Tail Light Brackets

A range of extensions, mount converters and brackets for the Kellermann Atto range of miniature LED Motorcycle Indicators and Stop and Tail Light.

Price: £3.49
Kellermann
3.90 EUR 4.59 USD
10mm LED Motorcycle ATV Dashboard Warning Lights

10mm LED motorcycle or ATV dashboard warning lights, with cable and mounting clip, for 12 volt DC. Amber. red, blue or green colours available.

Price: £3.49
Highsider
3.90 EUR 4.59 USD
BikeIt Motorcycle Balaclavas

BikeIt Motorcycle Balaclavas are made from a double seamed construction and come in 3 versions, Synthetic Silk, Thermal Cotton and Thermal Cotton 2 Eye.

Price: £3.49
BikeIt
3.90 EUR 4.59 USD
Rear Reflector for Highsider Tail Tidy Range

E-marked reflector which is suitable for the Highsider range of tail tidies, rectangular with a reflector surface of 85 x 30 mm. 

With an M5 threaded bolt for mounting.

Price: £3.95
Highsider
4.42 EUR 5.20 USD
BikeIt Thermal Cotton Motorcycle Inner Gloves One Size

BikeIt Thermal Cotton Motorcycle Inner Gloves One Size offer extra warmth under motorcycle or scooter gloves.

  • One size fits all..
Price: £3.95
BikeIt
4.42 EUR 5.20 USD
Oxford Motorcycle Clean Reservoir Cover
Avoid brake fluid leaks and spills by fitting an Oxford Motorcycle Clean Reservoir Cover over your brake reservoir.

Simple stretch-fit, one size fits all
Price: £3.95
4.42 EUR 5.20 USD
Oxford Motorcycle Clean Grips Grip Protectors
Avoid contamination of your handlebar grips by fitting this pair of Oxford Motorcycle Clean Grips before working on your bike.

Simple Velcro attachment, one size fits all
Price: £3.95
4.42 EUR 5.20 USD
Self Adhesive Round Rear Reflectors Pair Supplied

These 20mm self adhesive round rear reflectors come as a pair.

Price: £3.95
BikeIt
4.42 EUR 5.20 USD
Motogadget Push Button Mini Switch

The ultra compact Motogadget Push Button Mini Switch is used for operating and setting all instruments. Designed for you to enclose in a housing.

  • Length 16 mm, bore diameter 5 mm
Price: £3.99
Motogadget
4.46 EUR 5.25 USD
Oxford Bungie Xtra Elasticated Flat Motorcycle Straps

These flat profile Oxford Bungie Xtra Flat Motorcycle Straps can be attached to secure mounting points, such as dedicated luggage hooks, solid footrest brackets or parts of the motorcycle frame.

Their flat profile spreads the load over surface reducing the chafing effect, we still recommend using and Oxford Luggage Blanket over painted surfaces though.

  • 16mm width
  • 3 lengths available
Price: £3.99
Oxford Products
4.46 EUR 5.25 USD
12mm Motorcycle Dashboard Warning Lights

These  Motorcycle Dashboard Warning Lights come with a plastic washer and a metal nut. Available in blue high beam, red oil and green indicator versions. Please check legality in your country.

Price: £4.25
Highsider
4.75 EUR 5.59 USD
Oxford InsuLever Essential Insulating Motorcycle Lever Sleeves

Oxford InsuLever Lever Sleeves provide essential insulation against cold weather which would otherwise chill your levers. 

  • Vibration absorbing lever sleeves
  • Ergonomic design for better control
  • 100mm and stretchy enough to fit the majority of levers
  • Adhesive included
  • Sold as pair
Price: £4.45
4.97 EUR 5.86 USD
Self Adhesive Long Amber Side Reflector Kit E~Marked

These 22mm x 94mm long amber self adhesive side reflectors come as a pair and are E-marked.

Price: £4.49
BikeIt
5.02 EUR 5.91 USD
Self Adhesive Long Red Rear Reflector Kit E~Marked

These 22mm x 94mm long red self adhesive rear reflectors come as a pair and are E-marked.

Price: £4.49
BikeIt
5.02 EUR 5.91 USD
Reflector T~Bracket for Highsider Number Plate Brackets

T-Bracket extension to fix your reflector to Highsider Number Plate Brackets

Price: £4.95
Highsider
5.53 EUR 6.51 USD
18mm Head Diameter M14 ATV Dash Warning Lights

These 18mm Head Diameter and M14 thread dashboard warning lights are available as the following

  • Green Indicator Arrow
  • Green Sidelights
  • Blue Mainbeam
  • Red Oil Light

12v 2w consumption

Sold individually

Price: £4.95
Highsider
5.53 EUR 6.51 USD
Shin Yo M8 Mirror Adaptor for Harley Davidson Motorcycle

This Shin Yo M8 Mirror Adaptor for Harley Davidson Motorcycles is used to mount mirror stems with an M8 x 1.25 tapped blind hole to Harley Davidson motorbikes.

  • Fits mirror stems with an M8 x 1.25 tapped blind hole
  • Available in Black or Chrome
  • Sold individually
Price: £4.95
Shin Yo
5.53 EUR 6.51 USD
250mm Motorcycle Mud Flap and Fitting Kit

Soft rubber 250mm Motorcycle Mud Flap and Fitting Kit

Price: £4.95
BikeIt
5.53 EUR 6.51 USD
Bolt Mount Round Rear Reflectors Pair Supplied

These 20mm round rear reflectors come as a pair and are mounted using an 8mm bolt and wing or butterfly nut.

Price: £4.95
BikeIt
5.53 EUR 6.51 USD
Shin Yo STURGIS Chrome Right~Hand Motorcycle Mirror

OVER 50% DISCOUNT, REDUCED FROM £21.99! 

 High Quality Shin Yo STURGIS Right-Hand Custom Mirror

  • Rectangular aluminium head
  • Chrome Plated
  • Built-in vertical adjustment
  • Right-Handed for japanese motorcycles & Harley Davidson
  • Inc, extra adaptor M10 with l/hand thread for Yamaha

Mirror Dimensions (W) x (H): 110mm x 30mm

FURTHER BULK DISCOUNT ALSO AVAILABLE, CONTACT FOR DETAILS!

  • 4-9 UNITS £8 EACH
  • 10-19 UNITS £7 EACH
  • 20+ UNITS £5 EACH

DISCOUNT WILL BE APPLIED AT CHECKOUT

List Price: £21.99
Price: £4.95
Shin Yo
5.53 EUR 6.51 USD
Motorbike LED Indicator Relays and Resistors

LED Motorbike indicators work with a lower wattage than standard bulb type indicators. To avoid rapid flashing it may be necessary to replace the existing relay with a specially designed LED relay correcting the wattage.

If you are only changing one pair of indicators eg the rear, you can use inline resistors, these are required for each indicator.

The selection you make below changes the image to show that choice..

Price: £4.95
BikeIt
5.53 EUR 6.51 USD
Yamaha Mirror Adaptors for M10 Left Hand Fitment Black

Converts Black Universal M10 mirrors for use with Yamahas left hand thread on the right hand mirror mount.

Left hand Yamaha mirrors have a right hand thread, right hand Yamaha mirrors have a reversed anti-clockwise thread.

The right hand adaptors in this kit will allow a universal 10mm standard thread mirror to be attached. It has a 10mm reverse thread at the base, and in iternal 10mm thread at the top.

Provided as pair

Price: £4.99
BikeIt
5.58 EUR 6.57 USD
Yamaha Mirror Adaptors for M10 Left Hand Fitment Chrome

Converts Universal M10 mirrors for use with Yamahas left hand thread on the right hand mirror mount !!

Left hand Yamaha mirrors have a right hand thread, right hand Yamaha mirrors have a reversed anti-clockwise thread.

The right hand adaptors in this kit will allow a universal 10mm standard thread mirror to be attached. It has a 10mm reverse thread at the base, and in iternal 10mm thread at the top.

Provided as pair

Price: £4.99
BikeIt
5.58 EUR 6.57 USD
Muc~Off Motorcycle Cleaning Brushes Individual and Sets

Individually available motorcycle cleaning brushes in a variety of shapes and sizes, with tough impact resistant handles, with either soft or ultra stiff nylon bristles depending upon the intended use.

  • Detailing brush
  • Wheel and Component Brush
  • Soft Washing Brush
  • Claw Brush
  • 2 Prong Brush

    Also available in either a 3 or 5 brush kits.
  • 3 Brush (Detail, Claw and Soft Wash)
  • 5 Brush (all as above)
Price: £5.45
6.09 EUR 7.17 USD
Oxford Replacement Mirror Adaptors
Oxford Replacement Mirror Adapters allow Oxford Mirrors to be fitted to a variety of different thread sizes.
 
Click for more details.
Price: £5.45
Oxford Products
6.09 EUR 7.17 USD
Oxford Magneto Magnetic Motorcycle Workshop Tray
This Oxford Magneto Magnetic Motorcycle Workshop Tray is a handy tool for any garage or workshop to help prevent the loss of steel parts during repairs.
  • Ideal for storing steel components
  • Made from high quality stainless steel
  • 6cm diameter magnetic base encapsulated in rubber

Available in two sizes; 10cm or 15cm diameter

Price: £5.45
6.09 EUR 7.17 USD
Oxford Motorcycle Exhaust Bung 2
Stop water from going up your exhaust pipe when cleaning your bike by using this Oxford Motorcycle Exhaust Bung 2 for 2 stroke motorcycles.
 
Specially formulated soft rubber compound is flexible, universal and easy to insert and remove, but robust enough to last.
 
Easy-to-grab handle and tab makes removal simple.
 
Price: £5.45
6.09 EUR 7.17 USD
Highsider CNC Mirror Mounting Hole Cap M10 Black

Highsider CNC Mirror Mounting Hole Cap M10 Black made of aluminium is a cover for original M10 mirror thread. For a beautiful finish and corrosion protection. The rubber at the cylinder ensure a good fit. Well suited for handlebar end mirror upgrade.

Dimensions
  • Diameter: 16.5 mm
  • Diameter cylinder: 8 mm
  • Depth: 11.5 mm
Delivery contents: 1 pair
Price: £5.95
Highsider
6.65 EUR 7.83 USD
Indicator Winker Stem for various HONDA and KAWASAKI Motorcycles

Indicator winker stem for various HONDA and KAWASAKI motorcycles, supplied individually please order 2 for a pair.

  • 207-002 length 25 mm, connection diameter 14 mm, bolt M10
  • 207-003 length 65 mm, connection diameter 14 mm, bolt M10
Price: £5.95
Shin Yo
6.65 EUR 7.83 USD
Motorcycle Fairing Indicator Spacers

Pairs of motorcycle fairing indicator spacers in bike specific shapes and sizes.  These allow you to bridge the gap when replacing bulky original indicators with neater and smaller aftermarket sets.

Please click the image above to go to the detail page for dimensions.

Price: £5.95
BikeIt
6.65 EUR 7.83 USD
Oxford Motorcycle Exhaust Bung 4
Stop water from going up your exhaust pipe when cleaning your bike by using this Oxford Motorcycle Exhaust Bung 4 for 4 stroke motorcycles.
 
Specially formulated soft rubber compound is flexible, universal and easy to insert and remove, but robust enough to last.
 
Easy-to-grab handle and tab makes removal simple.
 
Price: £6.45
7.21 EUR 8.49 USD
Motorcycle Exhaust Silencer Can Banjo Clamps

Motorcycle Exhaust Silencer Can Banjo Clamps for securing silencers to link pipes and down pipes.  Chromed finish and available in 29mm to 68mm size ranges..

  • Priced individually, click configure for sizes

 

Price: £6.95
Viper Exhausts
7.77 EUR 9.15 USD
Motogadget Supersealed Connector AMP~Style 6~pin

This Motogadget supplied AMP-Style 6-pin Supersealed Connector comes as a complete kit with the six male and female pins.

The Supersealed series 6-pin connector kit is a highly robust, water-tight plug-in connector. 
Parts included are male and female connector housings, matching crimp-on pins and wiring insulation.
Price: £6.99
Motogadget
7.81 EUR 9.20 USD
Muc~Off Premium Microfibre Motorcycle Bodywork Fairing Polishing Cloth

Muc-Off Premium Microfibre Motorcycle Bodywork and Fairing Polishing Cloth contains an amazing 'split-fibre' technology that increases surface area absorbency, eliminates smears or blemishes

  • Dirt is disintegrated into miniscule particles that are kept within the fibres of the cloth.
  • Leaves a perfectly clean surface with an in-depth shine that has to be seen to be believed.
Price: £7.45
8.33 EUR 9.80 USD
Oxford Wheel Stripes 7mm Motorcycle Rim Tapes

These are Oxford Wheel Stripes, they are 7mm wide motorcycle rim tapes in a unique pre-curved four part design.  Sufficient length for two 17" wheels.  Available in five different colours.

  • Easy to apply - no applicator required
  • 7mm wide to fit 17" wheels
Price: £7.45
Oxford Products
8.33 EUR 9.80 USD
Oxford Visormate Essential Visor Cleaner

Simple and easy to use - pump action spray for quick coverage.
 

  • Clean lights, screens, mirrors, goggles etc.
  • Integral sponge and visor wipe
  • Sale is for one Visormate with fluid
Price: £7.45
Oxford Products
8.33 EUR 9.80 USD
Oxford Cruise Anti~Fatigue Motorcycle Throttle Assist
The Oxford Cruise Anti-Fatigue Throttle Assist reduces wrist and hand fatigue on long journeys by assisting the throttle operation when cruising on motorways/major roads.
  •  Easy to fit and remove
  •  Easily adjustable
  •  Fits the majority of motorcycles and scooters

Available in two sizes to fit 28-36mm diameter grips

Price: £7.45
8.33 EUR 9.80 USD
LED Rear Light Can~Bus Compensator Resistor Lead

LED Rear Light Can-Bus Compensator Resistor Lead for motorbikes with CAN-bus electrical system such as the BMW R1200GS which may show an error if a LED tail light is mounted.

  • To avoid an error message, this resistor is connected to the rear light.
  • Resistor with adaptor cable and 4.7mm or 6.3mm blade connectors. 
Price: £7.95
Highsider
8.89 EUR 10.46 USD
Indicator Adaptor Leads OEM Plugs to Bullet Connectors

Save cutting wires by using these indicator adapter leads which convert from OEM plugs to aftermarket bullet connectors.

  • Please confirm suitability by selecting fitting below and checking images
  • Supplied in pairs
Price: £7.95
Highsider
8.89 EUR 10.46 USD
Shin Yo Micro Pin LED Motorcycle Front Position Light

This 18mm Diameter Shin Yo Micro Pin LED Motorcycle Front Position Light is designed to be built in to bodywork.  It is supplied singularly and has a smoked finish.

  • Diameter 18.3mm
  • Depth 13mm
  • One supplied
  • E-marked for front use
Price: £7.95
Shin Yo
8.89 EUR 10.46 USD
Aprilia BMW Triumph YZFR125 Highsider Tail Tidy Adapters for OEM Indicators
Fitting Aprilia/BMW/Triumph and the YZFR125 Highsider Tail Tidy Adapter for OEM Indicators, made of black aluminium for mounting the original indicators in combination with our HIGHSIDER license plate brackets (Item No. 280-xxx).
 
Accurate matched – our expansive HIGHSIDER equipment is perfectly fitting for your motorcycle. With a maximum of quality and functionality you can design your bike according to your wishes.
Price: £7.95
Highsider
8.89 EUR 10.46 USD
Ducati Highsider Tail Tidy Adapters for OEM Indicators
Fitting various Ducati models these Highsider Tail Tidy Adapter for OEM Indicators, made of black aluminium for mounting the original indicators in combination with our HIGHSIDER license plate brackets (Item No. 280-xxx).
 
Accurate matched – our expansive HIGHSIDER equipment is perfectly fitting for your motorcycle. With a maximum of quality and functionality you can design your bike according to your wishes.
Price: £7.95
Highsider
8.89 EUR 10.46 USD
Honda Highsider Tail Tidy Adapters for OEM Indicators
Fitting various Honda models these Highsider Tail Tidy Adapter for OEM Indicators, made of black aluminium for mounting the original indicators in combination with our HIGHSIDER license plate brackets (Item No. 280-xxx).
 
Accurate matched – our expansive HIGHSIDER equipment is perfectly fitting for your motorcycle. With a maximum of quality and functionality you can design your bike according to your wishes.
Price: £7.95
Highsider
8.89 EUR 10.46 USD
Kawasaki Highsider Tail Tidy Adapters for OEM Indicators
Fitting various Kawasaki models these Highsider Tail Tidy Adapter for OEM Indicators, made of black aluminium for mounting the original indicators in combination with our HIGHSIDER license plate brackets (Item No. 280-xxx).
 
Accurate matched – our expansive HIGHSIDER equipment is perfectly fitting for your motorcycle. With a maximum of quality and functionality you can design your bike according to your wishes.
Price: £7.95
Highsider
8.89 EUR 10.46 USD
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »
 

Your Cart

0 Product(s) in cart
Total £0.00
 

Catalogue Downloads

catalogue download page
 
Payments By
  • Secure payments by paypal
  • PayPal Express
  • Prices include 20% VAT
    VAT for none EU countries will be removed at checkout