Silicon-Power-Diode 5A, (U) 50V, blocking-diode. When adding LED rear tail light / turn signal combinations in addition to bulb original tail lights, it can happen that a small leakage current flows from the brake line,  when the Rear light cable is connected or vice versa. 

For example we have just had a supplementary LED rear light switch off when the brake light cables are connected.

To prevent this, a 5A blocking diode in series is connected to the brake light cable in a way that the current can flow to the new LED tail light but not back. The silver bar on the diode marks the direction to where the electricity can flow.

LED Rear Light Can-Bus Compensator Resistor Lead for motorbikes with CAN-bus electrical system such as the BMW R1200GS which may show an error if a LED tail light is mounted.

• To avoid an error message, this resistor is connected to the rear light.
• Resistor with adaptor cable and 4.7mm or 6.3mm blade connectors. 

This Shin Yo Twin motorcycle rear stop and tail light has 2 extremely bright red power LED's in a crystal clear optical housing.  It is fully road legal with e-markings.

• Width 70mm, height 24mm, depth 20mm
• Mounting screws 44mm apart
• Does not have a number plate light

BikeIt Old English Design Lucas Type Motorcycle Stop and tail lamp with chrome surround and number plate light

• Overall width 120mm
• Overall height 55mm
• Overall depth with bulb holder protrusion on rear 78mm
• Depth without bulb holder 48mm
• Mounting screws 88mm centres
• 12v stop and tail light
• Please note no seal is present between lens and housing.

This Shin Yo Mini Motorcycle Rear Stop and Tail Light is fully road legal being e-marked.  It has a black plastic body and includes a number plate light.

• Housing diameter 55mm
• Depth 75mm
• 12v 21/5w bulb supplied
• 6v bulb option
• E-marked

This Highsider Malibu Motorcycle Stop and Tail Light has a smoked lens and is on a black mounting plate. It is fully road legal being e-marked.

ABS plate dimensions:

• Width 50 mm 
• Height 14 mm
• Depth 20 mm

BikeIt Flare LED Motorbike Brake & Tail Rear Light with a 55mm clear lens.

• Simple screw back fitting
• 51mm  complete length
• 13mm  bottom part
• 55 mm diameter

This Shin Yo LED Motorcycle Stop and Tail Light with brake and driving light. The housing comes with a clear, red or smoke lens and two M4 vertical threads for mounting (underneath tails etc), E-marked and road legal.

• Length: 78 mm
• Height: 16 mm
• Depth: 32 mm

Note

• Delivery contents: 1 piece
• Without licence plate light.

This GS Mini Motorcycle Tail Light with Stop Light and number plate light is fully e-marked for road use and comes with a mounting bracket.

• Lens width 67mm, height 47mm
• 12v bulb with 6v option

• Height: 43 mm
• Width: 68 mm
• Depth: 44 mm
• Hole distance: approx. 35 mm
• 21/5w bulb

• Height: 55 mm
• Width: 84 mm
• Depth: 57 mm
• Distance between the screws: 48 mm
• Bulb 12v 21/5w

This Shin Yo Texas Motorcycle Rear Stop and Tail Light is E-marked and has a built in mounting bracket which is adjustable for angle. It comes in gloss black or chrome, plastic housings. Includes number plate light.

Dimensions

• Lens diameter 45mm
• Housing diameter 55mm
• Depth 85mm
• 12v 21/5w bulb (6v bulb available)
• E-Marked

This Highsider Steel Weld In Housing for SHORTY 2 Series Indicators and Rear Lights, the housing is made of good weldable steel. This offers additional possibilities to attach the SHORTY 2 lighting series to suitable vehicle parts.

Delivery contents: 1 piece please order 2 for a pair

This Shin Yo MADISON LED Stop and Tail light is composed of black plastic plate and with bow-shaped smoked lens, its is road legal and E-marked. 

• Diameter: 54,5 mm
• Depth: 48 mm
• Hole distance: 38 mm
• Threaded bolt: M4

This Custom Motorbike LED Stop and Tail Light is E-marked and designed to fit on a level surface rear mudguard or fender, comes in a chrome or black plastic housing and is e-marked. 

Housing has two threads M4 for mounting and a gummed pad on the under side. Brake and driving light show in red, no number plate light. 

• Dimension: W x H x D = 91 x 22 x 60 mm.
• Red or clear lens
• E-marked

This 37mm diameter Shin Yo Micro Disc LED Motorbike Rear Light has a clear finish lens and is e-marked for road use.

• Diameter 37mm depth 18mm
• M6 mounting bolt
• E-marked road legal
• One supplied

This Shin Yo LED Stop and Tail Light CUBE-V (vertical use) or CUBE-H (Horizontal use) with 3 SMDs to build into bodywork is fully E-Marked and supplied individually.  It is fitted with a smoked or red lense.

• Vertical fitting - Width 11mm, height 23.5mm, depth 13mm
• Horizontal fitting - Width 27mm, height 10mm, depth 13mm
• E-marked
• One supplied

This 20mm diameter Shin Yo PIN LED Stop and Tail Light is for building into bodywork, it is fully E-Marked and supplied individually.  It is fitted with a smoked or red lens.

• Diameter 20mm, depth 15mm
• E-marked
• One supplied

This 31mm diameter Shin Yo Micro Disc LED Motorbike Rear Light and stop light, has a smoked finish lens and is e-marked for road use.

Pre-wired with bullet connectors.

• Diameter 30.5mm depth 14mm
• M6 mounting bolt
• E-marked road legal
• One supplied

This Twin Round Rear Motorcycle Stop and tail Lamp with Number Plate Hanger and number plate light.

• 12v stop and tail light.
• Lens diam 50mm
• Overall diam 54mm
• Front depth 28mm
• Rear hidden depth 30mm

This Twin Square Rear Motorcycle Stop and tail Lamp with Number Plate Hanger and number plate light.

• 12v stop and tail light
• each light 50mm long  x 45mm wide
• light plate   51mm wide  x 131mm long
• fixing plate  170mm long   x  54mm wide
• slots  25mm long    centre to centre  120mm

This Shin Yo Modena Custom LED Stop Tail Light is E-marked it comes with a clear lens and a Black finished ABS housing. Chrome discontinued..

Dimensions:

• total width 73 mm,
• lens width 58,5 mm,
• total height 37 mm,
• lens height 26 mm,
• depth 31,5 mm inc lens
• without licence plate light

Shin Yo Shorty LED motorbike stop and taillight, red, clear or smoked lenses available, fully road legal and e-marked.

• Dimension: approx. W x H x D = 40 x 8 x 13 mm
• Adhesive-backing
• E-Marked

Matching Indicator Pair

These Highsider STRIPE Rear Stop and Tail Lights are fully e-marked and road legal.  They are available in a smoked, clear or a red lens (all light red).

• Adhesive mounted
• Width 54mm, Height 7mm, Depth 15mm
• Black plastic body
• E-marked
• One supplied

This Shin Yo Oval Universal Motorbike Stop and Tail Light has a 12v 21/5w bulb (can take 6v) and is fully e-marked and therefore road legal.

• Width 103mm, height 72mm, depth 68mm
• Mounted by two M5 bolts with 20mm length and 40mm spacing
• Includes number plate light
• Road legal

This round Shin Yo Bullet LED Mini Stop and Tail Light is road legal being fully E-Marked.  It comes in a black aluminium housing and is surface mounted with an M8 bolt.

Please note one supplied..

• Diameter 42mm
• Depth 36mm

The second generation of the popular SHORTY rear stop and tail light is now suitable for vertical and horizontal installation. The SHORTY 2 PRO has three very bright SMD LEDs and a special lens installed for optimal brightness.

Available in a red or smoke lens..

• Width: 40 mm, Height: 8,5 mm, Depth: 13 mm
• Adhesive-backing
• E-Marked

HIGHSIDER black metal cover with adjustable bracket for LED taillight LITTLE NUMBER 1.

BikeIt Street Motorcycle Stop and Tail Lamp with Number Plate Light

• 12v stop and tail light.
• Number plate light
• 160mm long
• 40mm across the centre
• 36mm deep

• Width: 110 mm
• Height: 27 mm
• Depth: 62 mm

This ingenious Oxford 3-in-1 device combines tail-light, brake light and plate-light into a single light fitting.

• Super Bright LEDs
• Rainproof
• No Maintenance Required
• Tail, Brake & Plate Light in One
• Dimensions 113mm (L) x 32mm (W) x 27mm (H)

BikeIt Cateye Rear Motorcycle Stop and tail Lamp with Number Plate Hanger

• 12v stop and tail light

   

The Shin Yo Mini Oval Power LED Rear Stop and Tail Light is e-marked and fully legal in the UK and Europe.

It comes with one very bright Power LED  and either a clear or red lens.

• Power LED 12v 1.3w/0.5w
• Width 54mm
• Height 20mm
• Depth 22mm
• Secured by 2x M5 bolts
• E-Marked

This Shin Yo Memphis Black Oval LED Motorbike Stop and Tail Light has an open centre and a black plastic body.  It includes a mini bracket and is E-marked.

Dimensions

• Outer Width 100mm (inner 70mm)
• Outer Height 50mm (inner 20mm)
• Depth 23mm inc lens but not bracket
• One supplied

This is a surface mount Classic British Motorcycle Stop and Tail Light with built in number plate illumination.

This Twin Cateye Rear Motorcycle Stop and tail Lamp with Number Plate Hanger

• 12v stop and tail light.

BikeIt Tri-Lite Universal LED Motorbike Stop & Tail Rear Light Lamp incoporates ultra bright and fast LED's and is available in either a RED or CLEAR lens.

The Tribe has powerful Red LED's which perform quicker and are brighter than standard bulbs.

• Size: Width 110mm, height 30mm
• Number plate light incorporated

The Highsider Multiflex multi adjustable angle motorcycle LED stop and tail light, has a black plastic base, a clear lens, and is E-marked.  Attached by an adhesive pad which is included.

• Light swivels within mounting base
• Width 56.5mm
• Height 19mm
• Depth 20mm
• E-marked

This Shin Yo Superflat Rectangular Stop and Tail Light has a clear lens and a black plastic mounting bracket extension either end.  Its is fully road legal and e-marked.

• Dimensions 95mm x 25mm x 10.5mm thick
• Rear driving light
• Stop light
• No number plate light facility

This Highsider Micro Bullet LED Motorcycle Stop and Tail Light is built with an aluminium housing, they can be mudguard mounted and come with a 15mm extension stem if extra length is needed.

• Lens 27mm diameter
• M10 mount thread
• Body length 75mm inc. lens
• Supplied individually
• E-marked

This Shin Yo Little Number One LED Motorcycle Rear Stop and Tail Light includes number plate illumination and is fully e-marked for road use.

A black metal housing is availabe here

• 3 different colour options
• Width 81mm, height 23mm, depth 29mm
• Central rear exit for cables
• Mounting screws: 2 x M4, hole spacing: 52 mm (centre - centre)

HIGHSIDER STRING LED motorbike stop and taillight, red or smoked lenses available, fully road legal and e-marked.

• Dimension: approx. W x H x D = 126 x 9,0 x 10,5 mm
• Waterproofed
• Adhesive-backing
• E-Marked

The SHIN YO Mini LED MONZA stop and tail light comes with black housing and adjustable bracket. Clear removable LED insert with license number plate light, E-marked road legal.

Diamond shape stop tail light comes with a smoke lens, carbon look rear plastic and splash protection. For universal mounting at the rear of the motorcycle, E-marked.

• Width:95 mm
• Length (from top to taillight): 200 mm

This Shin Yo Enduro Style LED Rear Stop and Tail Light with Mudguard is E-marked with a black universal rear mudguard and built in number plate light.

Light dimensions Width 84mm, Height 22mm, Depth 39mm.

Available with a red lens, now clear discontinued.

The Shin Yo Old School "Type 2" LED Rear Stop and Tail Light has a black ABS body and a clear lens. It is e-marked for use in the UK and Europe.

• Width 56mm
• Height 56mm
• Depth 26mm
• E-marked

This Shin Yo Nose LED Motorcycle Stop Tail and Number Plate Light is e-marked and therefore fully road legal.

It is available in either a smoke or clear lens, or a red outer with a clear centre lens.  All light up red when in use.

• Lens diameter 44mm
• Lens overall length 56mm
• Mounting bolts 30mm centres

Shin-Yo NOSE Single Lens LED Motorcycle Stop and Tail Light, with a chrome plated housing, with licence plate bracket and light

• Lens diameter 42 mm
• Lens length 56mm
• Number plate light
• E-marked

BikeIt Custom Chrome Motorcycle Stop and Tail Light with chrome surround and number plate light

• 12v stop and tail light
• Non e-marked
• lens  101mm wide x 66mm high
• 40mm deep at the top    
• 90mm deep at the bottom including the lens

Tombstone Custom Motorbike Rear Stop & Tail Light, with top mount number plate bracket and light.

• Number plate light incorporated

Invader LED Motorcycle Rear Stop & Tail Light with Plate Bracket in chrome oval housing, with aluminium number plate bracket and number plate light.

Light Dimensions

• Width 165mm
• Height 40mm
• Depth 45mm

This Shin Yo LINE LED Motorcycle Rear Stop and Tail Light is fully road legal being e-marked, it has a clear lens and a black plastic body. Includes a number plate light.

• Width 129mm, Height 21.3mm, Depth 25.5mm
• Mounted with 2x 4mm bolts 90mm centres
• 300mm wire tail length
• E-marked

The Shin Yo Old School "Type 1" LED Rear Stop and Tail Light has a black or chromed ABS body and a red lens. It is e-marked for use in the UK and Europe.

• Housing diameter 56.3mm
• Lens diameter 40mm
• Housing top length 57mm
• Housing bottom length 22mm
• E-marked

Shin-Yo STOP LED Motorcycle Stop and Tail Light, Red Lens Black Body E-marked black metal housing, STOP emblem with chromed detail, with number plate light.

• Overall diameter 70mm
• Overall depth 45mm
• Mounted with 2x 4mm bolts at 30mm centre spacing

• No licence plate light.
• Dimensions:
• Width: 42,5 mm
• Height: 14,5 mm
• Depth: 18,5 mm