MotorCycle Accessories
Tel: 01637 880530
Login Status
Not logged in

PLEASE NOTE OUR CHRISTMAS & NEW YEAR CLOSING DATES HERE » »

Products


 

Our products

Clamps & brackets for mounting indicators in various locations. Spacers & bolt adaptors can also be found here!

Home
Sort Products
Items per Page
Page Search
Chrome Universal Motorcycle Headlight and Indicator Brackets

Chrome Universal Motorcycle Headlight and Indicator Fork Clamp Brackets are avilable in a range of sizes. 

The mounting bolt hole is 6mm but can be drilled out to accomodate larger indicator stalks.

  • Pair supplied
  • Chrome plated
Price£14.49
Manufacturer Highsider
20.11 USD
Kellermann Atto Rhombus S Micro S M5 Indicators and Tail Light Brackets

A range of extensions, mount converters and brackets for the Kellermann Atto, Rhombus S & Micro S M5 range of miniature LED Motorcycle Indicators and Stop and Tail Light.

Price£3.49
Manufacturer Kellermann
4.84 USD
Highsider Steel Weld In Housing for SHORTY Series Indicators and Rear Lights

This Highsider Steel Weld In Housing for SHORTY Series Indicators and Rear Lights, the housing is made of good weldable steel. This offers additional possibilities to attach the SHORTY lighting series to suitable vehicle parts.

Delivery contents: 1 piece please order 2 for a pair

Price£17.49
Manufacturer Highsider
24.27 USD
HIGHSIDER 4 Cover Sleeves for M8 Indicator Mounting Bolts

These HIGHSIDER plastic cover sleeves for M8 indicator mounting bolts come as a pack of 4, after a new indicator installation you can cover the indicator bolts with help of plastic sleeves for a better finish and corrosion protection.

Delivery contents: 4 pieces
Price£3.49
Manufacturer Highsider
4.84 USD
Indicator Winker Stem for various HONDA and KAWASAKI Motorcycles

Indicator winker stem for various HONDA and KAWASAKI motorcycles, supplied individually please order 2 for a pair.

  • 207-002 length 25 mm, connection diameter 14 mm, bolt M10
  • 207-003 length 65 mm, connection diameter 14 mm, bolt M10
  • 6mm centre hole for cable pass through
Price£5.95
Manufacturer Shin Yo
8.26 USD
Motorcycle Fairing Indicator Spacers

Pairs of motorcycle fairing indicator spacers in bike specific shapes and sizes.  These allow you to bridge the gap when replacing bulky original indicators with neater and smaller aftermarket sets.

Please click the image above to go to the detail page for dimensions.

Price£5.95
Manufacturer BikeIt
8.26 USD
Highsider High End Black CNC Aluminium Indicator Brackets
These very high quality black Highsider CNC aluminium indicator brackets are supplied as a pair, they have an 8mm hole and clamp for M8 thread indicators.
  • Contains 2 clamps and 2 indicator holders
  • Available in a range different fork leg diameter size ranges
  • Reducer strips used for the smaller sizes on each option
Price£46.95
Manufacturer Highsider
65.14 USD
Highsider Weld in Housing for Shin Yo Pin Lights
Highsider weld in housing for Shin Yo Pin indicator and stop light series..
Top quality housing made of good weldable steel. The housing offers additional possibilities to attach the PIN lighting series to suitable vehicle parts.
 
Delivery contents: 1 piece please order 2 for a pair..

 

Price£17.49
Manufacturer Highsider
24.27 USD
Highsider Indicator Stem Extension for M8 bolt Mount Indicators Pair
HIGHSIDER Indicator stem extension, 27 mm Black extension for indicators with an M8 mounting bolt.
 
Dimensions
  • Extension: 27 mm
  • Diameter with sleeve: 14 mm
  • Bolt M8 x 1.25, length: 21 mm
Delivery contents: 1 pair
Price£17.95
Manufacturer Highsider
24.91 USD
Highsider Weld in Housing for Shin Yo Module 1 Lights
Highsider weld in housing for Shin Yo Module 1 indicator and tail light series.
Top quality housing made of good weldable steel. The housing offers additional possibilities to attach the Module 1 lighting series to suitable vehicle parts.
 
Delivery contents: 1 piece please order 2 for a pair..

 

Price£17.49
Manufacturer Highsider
24.27 USD
Kellermann M6 Variable Indicator Position Light Mounting Bracket for Atto Micro S Rhombus S
This Kellermann M6 Variable Lighting Adaptor offers a clean and easy solution for various mounting options and thus replaces an otherwise complex custom-made construction. It consists of two parts: A clamping piece, and a shank nut with an M6 internal thread. The clamping piece, which can be shifted and rotated on the shank nut, is compatible with any M5 threaded lamp (such as the Kellermann Atto®, Micro S or Rhombus S).
  • M6 shank nut - suitable for Harley Davidson etc
  • For mounting of M5 threaded lighting
  • Supplied individually
Price£19.95
Manufacturer Kellermann
27.68 USD
Motogadget mo.View Mirror Adaptors for mo.Blaze Disc and Cone Indicators
The mo.view bar adapter uni disc/cone allows the mounting of all mo.view handlebar end mirrors in combination with the mo.blaze handlebar end indicators without moving the grips and controls on the handlebars. 
It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end indicators. 
 
Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise or mo.view street.
 
PAIR SUPPLIED
Price£83.95
Manufacturer MotoGadget
116.48 USD
Motone Customs CNC Wrap Around Black Indicator Bracket Clamp Pair

The Wrap-Around Fork Indicator Clamps from Motone Custom are CNC milled from aviation grade billet 6061t aluminium and include a custom turned billet nut which slides down over the thread of your turn signal stem.

  • CNC milled
  • 1.5 & 1.25mm pitch nuts included
  • Supplied as a pair

Available in 35mm, 39mm, 41mm, 47mm & 49mm clamp sizes

 

Price£58.95
Manufacturer Motone Customs
81.80 USD
Highsider Weld in Housing for Stripe Run Lights
Highsider weld in housing for the Stripe Run indicator series..
Top quality housing made of good weldable steel. The housing offers additional possibilities to attach the Stripe Run lighting series to suitable vehicle parts.
 
Delivery contents: 1 piece please order 2 for a pair..

 

Price£17.49
Manufacturer Highsider
24.27 USD
Triumph Motogadget mo.blaze Pin Indicator Mounting Adapters

These Triumph Motogadget mo.blaze Pin Mounting Adapters allow the installation of our turn signals with M8 thread, especially the mo.blaze pin, at the original turn signal mounts of all watercooled Triumph Twins from 2016 on. 

 

Price£33.95
Manufacturer MotoGadget
47.11 USD
Motone Customs Top Shock Mount Indicator Bracket Pair
This Motone Custom Indicator Bracket is CNC milled from 3mm aviation grade billet 6061t aluminium, and allows the mounting of indicators to the top shock mount, either between the shock and the outer bolt or on the inside between the shock and the frame depending on your preference.
  • 16mm & 10mm holes
  • Total length 80mm
  • Supplied as a pair
  • Available in Black or Chrome
Price£14.45
Manufacturer Motone Customs
20.05 USD
BMW RNineT Indicator Mounting Plates

These Highsider aftermarket turn signal indicator mounting plates for the front or rear of the BMW RnineT are made from aluminium and painted black. 

The exact fit allows the mounting of various accessory indicators instead of the original indicators. 

Set for one pair of indicators supplied.

Price£11.49
Manufacturer Highsider
15.94 USD
Highsider Weld in Housing for Shin Yo Module 2 Lights
Highsider weld in housing for Shin Yo Module 2 indicator and front position light series.
Top quality housing made of good weldable steel. The housing offers additional possibilities to attach the Module 2 lighting series to suitable vehicle parts.
 
Delivery contents: 1 piece please order 2 for a pair..

 

Price£17.49
Manufacturer Highsider
24.27 USD
Highsider High End Chrome CNC Aluminium Indicator Brackets

These very high quality chrome Highsider CNC aluminium indicator brackets are supplied as a pair, they have an 8mm hole and clamp for M8 thread indicators.

  • Contains 2 clamps and 2 indicator holders
  • Available in a range different fork leg diameter size ranges
  • Reducer strips used for the smaller sizes on each option
Price£46.95
Manufacturer Highsider
65.14 USD
Highsider Universal CNC Bracket RS2 Motorcycle Accessory Mount
This Highsider Universal CNC bracket RS2 is a black anodized bracket made of aluminium for universal usage. Model RS2 is a brilliant multifunctional tool. Handlebar mount is possible for fixing brackets for instruments, navigation or mobile phones. 
 
Supplied individually
Price£22.49
Manufacturer Highsider
31.21 USD
Motogadget mo.view CNC BMW M12 Bar End Adaptors for Bar End Mirrors and Indicators
For the BMW RnineT and S1000R and others with 12mm internal threads, these mo.view bar end adapters enable the mounting of all mo.view handlebar end mirrors in combination with the mo.blaze disc or cone handlebar end indicators without moving the levers or switch fittings on the handlebars.
 
Pair Supplied
Price£49.94
Manufacturer MotoGadget
69.29 USD
Motone Customs CNC Wrap Around Brushed Indicator Bracket Clamp Pair

The Wrap-Around Brushed Fork Indicator Clamps from Motone Custom are CNC milled from aviation grade billet 6061t aluminium and include a custom turned billet nut which slides down over the thread of your turn signal stem.

  • CNC milled
  • 1.5 & 1.25mm pitch nuts included
  • Supplied as a pair

Available in 35mm, 39mm & 49mm clamp sizes

Price£58.95
Manufacturer Motone Customs
81.80 USD
Highsider Weld in Housing for Apollo Lights
Highsider weld in housing for the Apollo indicator, FPL & stop light series..
Top quality housing made of good weldable steel. The housing offers additional possibilities to attach the Apollo lighting series to suitable vehicle parts.
 
Delivery contents: 1 piece please order 2 for a pair..

 

Price£17.49
Manufacturer Highsider
24.27 USD
Highsider Steel Weld In Housing for Star MX1 Pro Series Indicators and Rear Lights

This Highsider Steel Weld In Housing for Highsider Star MX1 Pro Series Indicators and Rear Lights, the housing is made of good weldable steel. This offers additional possibilities to attach the lighting series to suitable vehicle parts.

Delivery contents: 1 piece please order 2 for a pair

Price£17.49
Manufacturer Highsider
24.27 USD
Motone Customs CNC Wrap Around Polished Indicator Bracket Clamp Pair

The Wrap-Around Polished Fork Indicator Clamps from Motone Custom are CNC milled from aviation grade billet 6061t aluminium and include a custom turned billet nut which slides down over the thread of your turn signal stem.

  • CNC milled
  • 1.5 & 1.25mm pitch nuts included
  • Supplied as a pair

Available in 35mm, 39mm, 41mm & 49mm clamp sizes

Price£58.95
Manufacturer Motone Customs
81.80 USD
 
Payments By
  • Secure payments by paypal
  • PayPal Express
  • Prices include 20% VAT
    VAT for none UK countries will be removed at checkout