Headlight Lens Retaining W Clips Pack of 3, secures headlight lens to inner of the headlight rim.

Bates Motorcycle Headlight Chrome Visor Peak 4.5" and 5.75". These high chrome bates headlight visor peaks simply locate between the housing rim and glass deflector.

Suitable for use with all 5.75" and 4.5" Bates headlights.

This 7" Inner Reflector and Glass Unit Replacement Motorcycle Headlight  can be used with most 7" round headlights, or with a headlight casing available separately.

It is compatible with H4 bulbs and holders and is pre-drilled with a parking light socket (H4 bulb not included)

• E-marked for UK (left hand dip) use
• 7" (170mm)

This European and USA suitable 7" Inner Reflector and Glass Unit Replacement Motorcycle Headlight  can be used with most 7" round headlights, or with a headlight casing available separately.

It is compatible with H4 bulbs and holders and is pre-drilled with a parking light socket (H4 bulb not included)

• E-marked for European USA  (right hand dip) use
• 7" (170mm)

Replacement light unit for “Dominator” Motorbike headlight unit using H4 12v60/55w bulbs, e-marked.

Dominator headlights have a dipped centre beam, meaning they can be used in the UK and Europe.

These 5 or 7 Inch Universal Motorcycle Headlights have a chromed ABS plastic back and a chrome rim.

• Recommended for lower capacity bikes
• 12v 35/35w bulb
• 16mm mounting holes
• 185mm mount width

This BikeIt rectangular replacement motorcycle headlight insert for the Yamaha DT125LC DT125R and TZR250 black surround and 12v 25/25w dip and main beam and a sidelight.

• Designed to replace the OEM headlight
• Bulb RP35 12V25/25W
• Visible glass 160 x 102mm
• Overall 180 x 125mm
• Surround depth 25mm

Shin-Yo EDGE Motorcycle Headlight Bottom Mount, constructed from ABS and E-marked with flat beam for use in UK and Europe, complete with parking light.  Suitable for RHD and LHD traffic.

• HS1 12v 35/35w bulb
• Width 140mm, Height 170mm, Depth 195mm
• E-marked with flat beam for use in UK and Europe
• Available in Chrome or Black finishes

These 7 Inch Universal Motorcycle Headlights are available with different coloured ABS backs and a chrome rim.

• 12v 35/35w bulb
• Black, White, Blue or Red backs
• 16mm mounting holes
• 185mm mount width

This BikeIt Rectangular Replacement Headlight for Honda C70E C90E CUB with chromed rim, glass lens and 12v 25w dip and main beam.

• Designed to replace the OEM headlight
• Bulb T19 12V25/25W included

This BikeIt rectangular replacement motorcycle headlight for the Yamaha RD125LC and TZR125 black plastic rear with chromed rim and 12v 60/55w (bulb not included) dip and main beam and a sidelight.

• Designed to replace the OEM headlight
• Takes Halogen H4 12V60/55W bulb (not included)
• complete unit 192 mm wide  x 135 mm high  x 126 mm deep

Bates Motorbike Headlight Upgrade or Replacement Inner 5.75 Inch H4 12v 60/55w Bulb and Sidelight. Struggling with older 35/35w Bates headlights, replace them with these inners for a much brighter beam to aid visibility.

• 5.75" lights have Halogen H4 12v 60/55w bulb
• 12v 5w parking light
• Left dip for UK use or right dip for Europe USA etc
  Non E-Marked

This BikeIt Replacement Headlight for the Honda H100 CD125 CD185 CD200T CB100N or CG125BR with chromed rim and 6v 25w dip and main beam, plus a sidelight.

• Designed to replace the OEM headlight
• Bulb RP30 6V 25/25W included

This BikeIt rectangular replacement headlight for the Suzuki GS125 and ZR50 black plastic rear with chromed rim and fittings for 12v 60/55w dip and main beam and a sidelight.

• Designed to replace the OEM headlight
• Sidelight bulb included
• Headlight bulb not included
• 180mm wide x 125mm high x 120mm deep

   

Dash Universal Sports Fairing Motorbike Headlight with integrated smoked screen. Twin headlight unit features 12v 35/35w bulbs.

Also includes built-in smoked indicators, and 2 extra sets of anodised headlight reflector stems.

E-marked Shin Yo Grooved ABS Plastic Bottom Mount Motorcycle Headlight with front position side light and is road legal for UK and European use.  Suitable for RHD and LHD traffic.

• black finish
• 12V 35/35W HS1 bulb
• E-marked for UK and European use
• Bottom mount
• Outer diameter 140mm
• Depth 120mm

Aura Universal Motorbike Fairing Headlight with Inbuilt Indicators has twin headlight bulbs.

• 12v 35w/35w bulbs
• 12v 10w indicators
• Non e-marked

This BikeIt round replacement motorcycle headlight for the Yamaha RD250LC and RD350LC black plastic rear with chromed rim and 12v 60/55w dip and main beam and a sidelight.

• Designed to replace the OEM headlight
• 175mm across the lens and 200mm across the whole unit (lens & case together)
• Bulb Halogen P43T H4 12V60/55W included
• Comes with mounting rubbers

This BikeIt Rectangular Replacement Headlight for Honda CB125TDC plastic rear with chromed rim and takes a 12v 25w (not included) dip and main beam and a sidelight.

• Designed to replace the OEM headlight
• Takes bulb BA20D 12V 25/25W not included
• whole of unit - 185mm across x 124mm high x 143mm deep

This Shin Yo Bullet Long Headlight has a main beam only and comes in a quality chromed housing with a bottom mount.

• 90mm lens diameter
• 109mm housing diameter
• 140mm depth
• H4 12v 60/55w bulb

Universal Raptor II Motorbike fairing comes with a dark screen, twin headlight with 12v 35w bulbs and built in Indicators.

Not E-Marked

Suited to lightweight bikes.

4.5" (110mm) lens E-marked Shin Yo Black ABS Bottom Mount Motorcycle Headlight with front position side light.  Suitable for RHD and LHD traffic

• 12V 35/35W HS1 bulb
• E-marked for UK and European use
• Bottom mount M10 bolt
• Outer diameter 125mm

This Shin Yo STORM Octagonal Chrome Motorcycle Headlight is for use in LHD countries such as European mainland and the USA.  It is fully e-marked for use in these countries.  

Available as side mount only now.

• H4 insert with parking light,
• 139 x 90 clear lens insert,
• housing 200 x 100 mm,
• depth from the mounting screw 90 mm,
• bulbs included
• E-Marked

• Universal fitting durable plastic fairing headlight.
• 12V 35/35W bulb with separate 12V 5W parking light.
• Four rubber fork mounting brackets supplied.
• NOT E-Marked

This Shin Yo High Beam only motorcycle headlamp comes with an LED parking light ring, it has a clear lens and includes a bracket.

• 102mm Lens diameter
• Black metal back
• 12v H3 55w bulb insert

Metal Cased 100mm Bottom Mount Motorcycle Custom Headlight e-marked for use in UK and Europe.  Includes parking light. Suitable for RHD and LHD traffic.

• 12v 35/35w dip and main headlight
• Outer diameter 131.5mm
• Lens diameter 100mm
• Body depth 132mm
• M10 mounting bolt
• Black finish

Shin-Yo 38mm Low Beam Projection Light E-Marked for UK Australia etc dips to the left, encased in black a metal front surround.

• H1 55 watt, for left-hand (side of the road) traffic only
• Height 14 mm from mount
• Frame diameter outer lens 53.5 mm
• Frame dimensions 76 x 57 mm
• Total length approx. 98 mm

This BikeIt Round Replacement Headlight for the Honda CB250N plastic rear with chromed rim and 12v 60/55w dip and main beam and a sidelight.

• Designed to replace the OEM headlight
• Bulb Halogen H4 12V60/55W included

This BikeIt Round Replacement 6" visible lens (152mm) Headlight for the Honda CB900 chrome rear with chromed rim and 12v 60/55w dip and main beam and a sidelight.

• Designed to replace the OEM headlight
• Bulb Halogen H4 12V 60/55W included
• Overall diameter 180mm (7 inch)
• Mount width 166mm
• Overall depth 120mm

Bikeit Universal Projector Headlight Bulbs UK Version are available in either a dip left or main version.
Projector headlights are universal fitting, they are extremey popular with special custom or streetfighter bike builders. They can be combined in nose cones or just left exposed.
H1 12volt 55watts

• Low beam, left dip for UK E-marked
• High beam no dip for UK E-marked
• Lens 59mm diameter
• Housing 74mm diameter (widest) and 35mm height from backplate

Bikeit Universal Projector Headlight Bulbs European LHD Version are available in either a dip right or main version.
Projector headlights are universal fitting, they are extremely popular with special custom or streetfighter bike builders. They can be combined in nose cones or just left exposed.
H1 12volt 55watts

• Low beam, right dip for Europe E-marked (not UK)
• High beam no dip for Europe E-marked  (not UK)
• Lens 59mm diameter
• Housing 74mm diameter (widest) and 35mm height from backplate

Bates 5.75" Chrome Motorbike Custom Headlight Units side and bottom mount chrome headlights. Or a 4.5" bottom mount option.
 

• 5.75" lights have Halogen H4 12v 60/55w bulb
• 4.5" lights have 35/35w bulb
• 12v 5w parking light
• Left dip for UK use
  Non E-Marked

Euro Version Bates 5.75" Chrome Motorcycle Custom Headlight Units side and bottom mount chrome headlights. Or a 4.5" bottom mount option.
 

• 5.75" lights have Halogen H4 12v 60/55w bulb
• 4.5" lights have 35/35w bulb
• 12v 5w parking light
• Right dip for Euro use
• E-Marked for European use

UK version here

The Axel Joost Motorcycle Mini Switch electronic relay contains 2 power outputs what can drive 60 Watt / each. The control is with a push button, to be connected to the yellow cable respect to gnd. Every push on the button will change the status of the outputs.

This is the standard operation for low - and high beam. If the green cable is be connected to gnd the outputs will change simultaneously. In this case you can use the relay as 120 Watt switch. Just cut the cable for the normal change between low beam and high beam.

BikeIt 7" Round Chrome metal headlight casing for use with HLUEUNIT7 and HLUINN13 lens insert order codes.

• Overall depth is about 11-12cm
• Mounting is about 90mm
• M10 Mount

Demon Universal Motorbike Fairing Headlight with Inbuilt Indicators incorporates twin headlights (12V 25/25W) and side indicators (12V 10W).
Set below a smoked fly screen.

Universal fitting to standard headlight brackets,“Demon” is available in 3 colour options.

Raider Universal Motorcycle Fairing Headlight with four rubber mounting brackets for fork fitting.  Available in Black, White, Red or Blue colours.

• 12v 35/35w bulb 
• separate 12v 5w parking light
• NOT E-Marked

Features unique LED pods (10 white LED's per pod) on each side for additional illumination.

Supplied with universal mounting rubbers

Shin-Yo 38mm Main High Beam Projection Light E-Marked for UK and European use encased in black a metal front surround.

• Lens diameter 38 mm
• Bulb H1 55 watt
• Height 14 mm
• Frame diameter outer lens 53.5 mm
• Total length approx. 98 mm

Shin-Yo 38mm Low or High Beam Projection Light E-Marked for Mainland Europe USA Etc encased in black a metal front surround.

• Low Beam for right-hand (side of the road) traffic only
• Bulb H1 55 watt
• Height 14 mm from mount
• Frame diameter outer lens 53.5 mm
• Frame dimensions 76 x 57 mm
• Total length approx. 98 mm

High Chrome Bottom Mount Custom Bullet Streetfighter Motorbike Headlight is a 4.75” bullet shaped headlight. it uses and H4 60/55w bulb and has a centre dip which is OK for UK, Europe and worldwide use.

• H4 60/55w bulb
• Non E-Marked

Dominator Single Motorbike Streetfighter Headlight Unit, 3.5” diameter bottom mount unit with H4 12v60/55w bulbs, e-marked.

Dominator headlights have a dipped centre beam, meaning they can be used in the UK and Europe.

Complete with bulbs in Matt Black, Chrome or Carbon effect finishes.

Universal Chrome Triangle Motorbike Custom Headlight 35w/35w suitable for use worlwide with a flat dipped beam.

• Adjustable bottom-mount
• Centre-dip lens (OK for UK and Euro)
• H6 12V 35/35W bulb
• Not E-marked

This BikeIt Universal Rectangle City Headlight for Lightweight Motorcycles is centre dip making it suitable for use in the UK and Europe.

• Measures 130x105x85mm
• S2 12v 35/35w bulb
• E-marked

This Bates Style 5.75" Custom Motorcycle Headlight with Copper Effect Rim is available in a LHD dip to the right version only, for which it is E-marked.  It has a clear lens with a prism style reflector.

We do supply a replacement lens to convert to UK use here

• Bottom Mount
• H4 12v 60/55w bulb fitted
• parking light
• black metal housing
• Copper style rim
• Housing diam 155mm, depth without lens 110mm
• Not for UK use

This Bates Style 5.75" Custom Motorcycle Headlight with a black metal casing is available in a LHD dip to the right version only, for which it is E-marked.  It has a clear lens with a prism style reflector.

We do supply a replacement lens to convert to UK use here

• Bottom Mount
• H4 12v 60/55w bulb fitted
• parking light
• black metal housing
• Housing diam 155mm, depth without lens 110mm
• Not for UK use

This Highsider Motorcycle LED Daytime Running Light (DRL) with front position light function in a rectangular, black aluminium housing. 4 power LEDs (each 1 watt) ensure that bikers are better seen from other road users in the daytime. This daytime running light will automatically change over in a dimmed parking light mode, if low beam will switched on. Inclusive bracket, E-mark. 

These Highsider British Style 7 Inch Fluted Lens Motorbike Headlights are e-marked for use in a European LHD situation and of course the USA.  They are available in a matt black or chrome finished metal side mount case.

• Side light fitted
• Bulb not included (takes H4 60/55w)
• Suitable for Europe and USA not UK

These LTD Style 7 Inch Motorcycle Headlights are E-Marked for use in the UK and worldwide due to having a flat dip beam pattern. Suitable for RHD and LHD traffic.

They have a clear lens with a prism shape reflector to angle the beam.

• Takes H4-bulb 12V 60/55W P43T (not included)
• 195mm between mounting points
• Parking light
• Chrome rim with either a chrome or black metal rear
• E-Marked road legal

This 60/55w HD Style Bottom Mount 7 Inch Motorcycle E-Marked Headlight is available in Matt Black or Chrome versions.  Suitable for RHD and LHD traffic road legal UK and Europe etc.

• H4 60/55w insert with parking light
• Harley style bottom bracket included
• Clear lens with prism reflector
• Housing diameter 220mm
• Depth without lens 148mm
• E-Marked
• Matt Black or Chrome options

The Falcon Universal Motorbike Fairing Headlight with H3 12v 55w bulb is available with red  or black screens.

Fully e-marked. Upgrade screens available separately.

Complete with fitting kit.

Universal 7” chrome motorcycle headlight.

• HS1 35/35W bulb.
• E-marked.
• Dip to right OK for Europe USA etc not UK

Highsider RENO 7 inch motorcycle headlight with prismatic reflector comes in either a high gloss black or chrome metal case.  E-marked and has a symmetric dip beam making it suitable for UK and European use.  Suitable for RHD and LHD traffic.

New version Black body with Chrome Rim available..

• Side fastening with M8 thread
• H4 60/55w bulb
• Parking/side light included
• E-marked road legal

This Dominator Twin Motorbike headlight set is 3.5” diameter per light, a side mounted unit with H4 12v 60/55w bulbs, e-marked.

Dominator headlights have a dipped centre beam, meaning they can be used in the UK and Europe.

Complete with bulbs in Matt Black or Chrome finishes.

Highsider Gothic Motorcycle Headlight Fairing E-marked for UK and European use in a Black finish. H4 12v 60/55w low and main beam with built in side light.

• Universal bracket included
• Height 340mm
• Width 315mm
• Light width 140mm, height 110mm, depth 105mm
• Suitable for RHD and LHD traffic.

These Adventure Motorcycle Touring Projector Headlights are totally waterproof and extremely durable with protector shield. The 80mm projector runs on 12v and mounts to engine guards with 3 size rubber inserts. 

• 80mm projector 12v headlight
• Totally waterproof
• Mounting bracket with 3 size rubber inserts
• Hi Beam model fits to right side of bike
• Low Beam model fits to left side of bike
• E-marked

This Shin Yo RENO 2 is a 7" inch motorcycle headlight and has an LED Halo (Angel Eyes) front position light feature. They have a prismatic reflector comes in either a high gloss black or chrome metal case.  E-marked and has a symmetric dip beam making it suitable for UK and European use.   

• Side fastening with M8 thread
• H4 60/55w bulb
• Diameter 190 mm x Depth 160 mm
• Suitable for RHD and LHD traffic