These Motorbike Headlight Bracket Spacers come as a pair. They are made of black plastic and measure 28mm diameter and 10mm thick. The internal diameter is 10mm.

Chrome Universal Motorcycle Headlight and Indicator Fork Clamp Brackets are avilable in a range of sizes. 

The mounting bolt hole is 6mm but can be drilled out to accomodate larger indicator stalks.

• Pair supplied
• Chrome plated

These BikeIt Standard Motorcycle Streetfighter Headlight Brackets adjust between 28 and 36mm fork diameters. 

95mm length from the front of the fork to the centre of the mounting hole.  This is measured down the centre line of the side arm.

They come in Chrome, Black or Carbon look finishes.

A choice of two aluminium Lower Yoke Motorcycle Bottom Mount Headlight Brackets in Single or Twin form headlight.

Single allows mounting of one 3.5" or 4.5" headlamp, twin allows two small (5" 130mm diam) headlamps as above to be mounted side by side.

• Thickness 6mm
• single rear width 11.2cm max, depth 8cm
• twin width 16.5cm max, 10.5cm min, depth 8cm

These Highsider Black Universal Motorcycle Headlight Brackets fit fork diameters 30-38mm and come with adjusting  rubbers.  

• Pair supplied
• Arm length is 90 mm (center of the hole)
• Clamp height 60 mm
• Mounting hole 10 mm

These Highsider Chrome Universal Motorcycle Headlight Brackets fit fork diameters 30-38mm and come with adjusting  rubbers.  

• Pair supplied
• Arm length is 90 mm (center of the hole)
• Clamp height 60 mm
• Mounting hole 10 mm

These Universal Bottom Mount Headlight Brackets are available in a Black or Chrome finish. 

They are universal but do fit on the VT600, VS 750/1400 and EN500 etc

Click image above for dimensions

The BikeIt Fairing Type Universal Motorcycle Headlight Bracket Kit is designed for fitting fairing headlights to front forks.

Multi diameter fork fitting.
Fully adjustable headlight fitting plate with 2 bolt securing option.
Sold as a pair

These BikeIt High Polished Chrome Motorcycle Headlight Brackets come complete with rubbers for optimum fit.

Sold in pairs

3 sizes available

• HLB7CH - 30-38mm fork diameter, 137mm length of arm to the tip
• HLB003 - 43-48mm fork diameter (down to 38mm using the extra rubber) 176mm length of arm to the tip
• HLB004 - 49-54mm fork diameter (down to 40mm using the extra rubber) 172mm length of arm to the tip

These BikeIt Deluxe Motorcycle Streetfighter Headlight Brackets come with a choce of coloured side arms.  

They are supplied with 31mm rubbers as standard and larger sizes are available as an extra option.

BikeIt Chrome Motorbike Headlight Brackets are of a premium quality, featuring chrome finished clamp and brackets.

Expanded range of bracket rubbers to fit all sizes of forks including USD. Please take into account the taper of the upper fork if present..

• Available in sizes ranging from 30mm to 57mm
• 90mm side length to centre of headlight mount
• Pair supplied

Shin Yo Aluminium Anodised Silver Motorbike Streetfighter Headlight Brackets Mount holes are 40mm centre to centre, overall height 70mm, bracket length is 110mm overall, 95mm from edge to headlight mounting hole centre.

• aluminium clear anodised
• 2 side brackets supplied

Shin Yo Aluminium Anodised Black Motorbike Streetfighter Headlight Brackets Mount holes are 40mm centre to centre, overall height 70mm, bracket length is 110mm overall, 95mm from edge to headlight mounting hole centre.

• aluminium anodized in black,
• 2 side brackets supplied

These Highsider Chrome Streetfighter Headlight Brackets come as a pair and have a 10mm headlamp mount hole.

Chromed with black rubbers

Available in 3 sizes

• 38-42mm fork diameter
• 43-47mm fork diameter
• 53-57mm fork diameter

   

Highsider Universal Motorbike Streetfighter Headlight Brackets feature matt black finished clamp and brackets.

Expanded range of bracket rubbers to fit all sizes of forks including USD. Please take into account the taper of the upper fork if present..

• Available in 3 sizes ranging from 30mm to 57mm
• Pair supplied

BikeIt Stealth Motorbike Headlight Brackets are of a premium quality, featuring black finished clamp and brackets.

Expanded range of bracket rubbers to fit all sizes of forks including USD. Please take into account the taper of the upper fork if present..

• Available in sizes ranging from 30mm to 57mm
• 90mm side length to centre of headlight mount
• Pair supplied

These Highsider CNC manufactured aluminium motorcycle headlight fork clamps come in various sizes and ether matt black or chrome finishes.

• CNC machined quality aluminium used
• Set uncludes 2 clamps and reduction strips for the smaller sizes in each size range
• Can be fitted without removing top yoke

Aluminium and Black Motorbike Streetfighter Head Light Bracket Set with chromed clamps.  Clamp holes are 40mm centre to centre, overall height 70mm, bracket length is 110mm overall, 95mm from edge to headlight mounting hole centre.

• aluminium anodized,
• 2 brackets
• 4 chrome clamps
• Available in 31mm to 58mm sizes

Aluminium and Chrome Motorbike Streetfighter Head Light Bracket Set with chromed clamps.  Clamp holes are 40mm centre to centre, overall height 70mm, bracket length is 110mm overall, 95mm from edge to headlight mounting hole centre.

• aluminium anodized,
• 2 brackets
• 4 chrome clamps
• Available in 31mm to 58mm sizes

These XS Highsider Motorcycle Headlight Bracket Sides are made by CNC in high quality aluminium.  They are supplied as a pair in either matt black or chrome.

• Thickness : 10 mm
• Arm length: (from clamp to headlight attachment): 48 mm
• Total length: 65 mm
• All indicators with a max bolt diameter of 10mm can be mounted on the brackets

These Highsider Motorcycle Headlight Bracket Sides are made by CNC in high quality aluminium.  They are supplied as a pair in either matt black or chrome.

• Headlight mount approx 4" (100mm) from the outside of the fork leg
• Fork brackets approx 2" (50mm) centres apart
• All indicators with a max bolt diameter of 10mm can be mounted on the brackets
• 2 sides supplied

Polished Aluminium and Chrome Motorbike Streetfighter Head Light Bracket Set

• aluminium polished,
• 2 brackets
• 4 chrome clamps
• Available in 31mm to 58mm sizes

Aluminium CNC Motorbike Head Light Brackets for Bottom Mount Headlights or supplemenatry lighting such as fog lights or indicators (vertically mounted)

• M8 x 1.25mm pitch thread
• Available in 41mm to 56mm fork tube sizes
• Sold individually please order 2 for a pair

These Fehling Custom Motorcycle Cruiser Spotlight Brackets are for fitting a pair of auxiliary light to the side of the headlight.  They are in either chrome or black. and are individually shaped for each particular bike.

Available for Honda VT VTX, Kawasaki VN, Suzuki VL VS VZ Intruder, Triumph Thunderbird and some Harley Davidson models.

Yamaha V-Max requires front indicators moving/changing.

This pair of Highsider RS1 CNC headlight brackets, are made from top quality aluminium which is black anodised, can be used for fixing a HIGHSIDER SATELLITE driving light or main beam light, a pair supplied.  M6 bolt hole for mounting lights.

Clamps are available in various fork diameter sizes, please measure at desired mounting point on your bike. 

Very High Quality Highsider CNC Matt Black Aluminium Motorbike Headlight Brackets for various front fork tube diameters. With 10mm indicator mounting point. Variable headlight mounting width no need for spacers.

New 49mm size with reducers on the 54mm clamps

Set Includes

• 4 fork clamps (please choose size)
• 2 side brackets
• Reducer strips used for the smaller sizes on the 54mm option
• Matt Black finish
• Headlight mount approx 4" (95mm) from the outside of the fork leg
• Fork brackets approx 2" (50mm) centres apart

Very High Quality Highsider CNC Chromed Aluminium Motorbike Headlight Brackets for various front fork tube diameters. With 10mm indicator mounting point. Variable headlight mounting width no need for spacers.

New 49mm size with reducers on the 54mm clamps

Set Includes

• 4 fork clamps (please choose size)
• 2 holders
• Reducer strips used for the smaller sizes on the 54mm option
• Chromed finish
• Headlight mount approx 4" (95mm) from the outside of the fork leg
• Fork brackets approx 2" (50mm) centres apart

Very High Quality Highsider CNC EXTRA SHORT Matt Black or Chrome Aluminium Motorbike Headlight Brackets for various front fork tube diameters. With 10mm indicator mounting point. Variable headlight mounting width no need for spacers.

Set Includes

• 4 fork clamps (please choose size)
• 2 side brackets
• Reducer strips used for the smaller sizes on each option
• Matt Black or Chrome finish

Highsider UB1 Urban MT03 Style Headlight Brackets and Clamps (headlight not included), price is for all items as listed below plus a pair of clamps in various sizes.

• 1x bracket right side
• 1x bracket left side
• 2x spacer bushing D.18mm x 3 mm.
• 2x intermediate adapter for attachment to CNC clamps.
• 2x rubber bushings with M6 thread.
• 4x stainless steel pan head Allen screws M6 x 25 mm
• 2x stainless steel pan head Allen screws M6 x 15 mm
• 2x CNC Clamps if selected below

Very High Quality Long Sided Highsider CNC Matt Black Aluminium Motorbike Headlight Brackets for various front fork tube diameters. With 10mm indicator mounting point. Variable headlight mounting width no need for spacers.

New 49mm size with reducers on the 54mm clamps

Set Includes

• 4 fork clamps (please choose size)
• 2 side brackets
• Reducer strips used for the smaller sizes on the 54mm option
• Matt Black finish
• Headlight mount approx 5" (120mm) from the outside of the fork leg
• Fork brackets approx 2" (50mm) centres apart

Very High Quality Long Sided Highsider CNC Chromed Aluminium Motorbike Headlight Brackets for various front fork tube diameters. With 10mm indicator mounting point. Variable headlight mounting width no need for spacers.

New 49mm size with reducers on the 54mm clamps

Set Includes

• 4 fork clamps (please choose size)
• 2 side brackets
• Reducer strips used for the smaller sizes on the 54mm option
• Chrome finish
• Headlight mount approx 5" (120mm) from the outside of the fork leg
• Fork brackets approx 2" (50mm) centres apart

These Highsider CNC Aluminium Z Shape Black Anodised Streetfighter Motorcycle Headlight Brackets can be adjusted to different widths of headlamps by rotating the clamps round the forks and are available in various fork diameters.

Contents:

• 4 x Aluminium clamps
• 2 x Z-style Aluminium brackets
• 4 x intermediate adapters
• 2 x Flat Washer 20 x 10 x 4 mm
• 4 x Allen key screws M6 x 14 mm

These Highsider CNC Aluminium Z Shape Chrome Plated Streetfighter Motorcycle Headlight Brackets can be adjusted to different widths of headlamps and are available in various fork diameters.

Contents:

• 4 x Aluminium clamps
• 2 x Z-style Aluminium brackets
• 4 x intermediate adapters
• 2 x Flat Washer 20 x 10 x 4 mm
• 4 x Allen key screws M6 x 14 mm

These premium quality Wunderkind CNC Black Custom Headlight Brackets and Clamps are designed to fit various fork diameters and they are available in short or long side versions.

CHARACTERISTICS

• Individually adjustable front light holder for numerous motorcycle types
• Finest surface finishing with the in-house BLACKPEARL anodized aluminium
• Flexibly adapts to the width of the headlamp housing 
• Simple mounting
• Available in long and short version (short arm: 55 mm / long arm: 75 mm)
• Available for a large range of fork tube diameters

LSL MT03 Style URBAN Motorbike Brackets for Urban Headlight. Made from billet aluminium of the highest possible quality.

Available in 38mm to 55 mm fittings and a selection of tapered fork fittings eg 51/54mm