The ultra compact Motogadget Push Button Mini Switch is used for operating and setting all instruments. Designed for you to enclose in a housing.

• Length 16 mm, bore diameter 5 mm

Oxford 12v Round 100db Motorcycle Horn

• Epoxy powder coated for long term corrosion resistance durability
• Universal mounting bracket to fir most motorcycles and scooters
• Bracket not removable
• Draws 1.5a

Available in black or chrome

Motorcycle Light on / off switch with clamp for mounting on handlebar.  

• Handlebar 7/8 inches (22 mm). 
• Dimensions: 20 mm x B. T. 44 mm, case height above the handlebar 21.5 mm.

Motogadget compact push button switch for operating and controlling all instruments. Also used as replacement push-button for the m-Switch.

The push-buttons are a high quality, very robust design and vibration- and spraywater proof (IP65). The ergonomic pressure point provides feedback when operating.

• Total length 22.7 mm, installation length 15.5 mm, installation diameter 12 mm
• Available in either black or stainless

Small traditional style handle bar indicator and horn switch, comes with a stainless steel cover.

• turn indicator switch
• two push button switches.

These On Off Motorcycle Handlebar Switches come in two versions, contact made and contact broken when in the 'ON' position.

Can be used as a cut out switch or auxiliary lighting, may need a relay for the latter.

• 22mm handlebar clamp
• 2 wire connections with male and female bullets
• Wire length roughly 17" 40cm
• 240-031 - contact made in the ON postion electric flows, switching to OFF breaks contact
• 240-038 - contact broken in the ON position no electric flows, switching to OFF makes contact

This Koso Aurora Fog Light (Item No. 222-205) Switch Kit includes a Y-cable to connect a maximum of two AURORA LED fog lights. When on the warning light shines green.

• Width: 26 mm
• Height: 34 mm
• Depth: 10 mm
• Cable length for current suply: approx. 580 mm
• Cable length for fog light approx. 1200 mm
• Y-cable length: approx. 600 mm

Motorcycle or Quad 3-position light + kill switch for 22mm handlebar mounting.

Motogadget Push Button Switch Kit M12 is finished in Black comprises a push button with M12 thread, a black anodized sleeve, a black anodized bracket and the connection cable.

It's easy to bolt it on at the handle bar with the clamp of a master cylinder or a mirror.

• The Push Button Kit provides a sturdy and water resistant solution with a good quality push button.
• It is unobtrusive and can be used for all our instruments and a lot of other applications.

• horn
• light off / stand light 
• indicator
• starter
• hazard light

• light on/parking/off, 
• Hi and Low beam switch, 
• horn, 
• indicator, 
• kill, 
• hazard switch 

Daytona external CNC 2-button handlebar switch, for universal switch for 7/8 inch or 1 inch handlebars.

• CNC aluminium
• Fits 22.2mm (7/8) or 25.4mm (1 inch) handlebars
• Switch can also be used as "MODE" & "SET" button of Daytona VELONA gauges
• Design allows the wiring to be routed either externally at the bottom of the switch, or internally through handlebars

The Motogadget M-Switch with 2 Push Buttons is available in a black or polished finish and in 1" or 22mm handlebars sizes.  The switches do not latch but make momentary connection as per their push button description.  Designed to be used with the m-unit and m-button wiring system products or similar.  They have a 2A maximum current so OK with a horn but need a relay if higher for lighting etc.

The Motogadget M-Switch with 3 Push Buttons (2 front and 1 rear) is available in a black or polished finish and in 1" or 22mm handlebars sizes.  The switches do not latch but make momentary connection as per their push button description.  Designed to be used with the m-unit and m-button wiring system products or similar.  They have a 2A maximum current so OK with a horn but need a relay if higher for lighting etc.

Special Order 10-14 days delivery

The Motogadget M-Switch Mini with 3 Push Buttons is available in a black or polished finish and in 1" or 22mm handlebars sizes.  The switches do not latch but make momentary connection as per their push button description.  Designed to be used with the m-unit and m-button wiring system products or similar as they have a 0.05A maximum current so need a secondary switching device of some sorts.