Handlebar risers enhance your riding experience by raising the handlebars up and and back to a more comfortable position, taking the strain off the neck, wrists and lower back.
This Motorcycle Handlebar Clamp Reducer Set allows the fitting of 22mm handlebars to 1" handle bar clamps.
These 22mm or Fat Bar Aluminium CNC Motorcycle Handlebar Riser Clamps raise handlebars by 30mm increasing comfort and reducing back strain. They sit on top of the original bottom clamp and longer bolts are supplied to secure the original top clamp down.
From Motone Customs, these handlebar riser inserts are 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminium - to fit one inch handlebars.
From Motone Customs, this handlebar riser top clamp bridge is 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminium - to fit one inch handlebars.
These Aluminium and CNC finished Motorcycle Handlebar Jumbo Conversion Clamps converts from 22.2mm standard bar clamps to the wider 28.6mm size, enabling the use of jumbo bars of 28.6mm diameter.
These Premium Aluminium CNC Motorcycle Multi Stage Handlebar Riser Clamps can raise handlebars by 4 different heights from 5mm to 30mm increasing comfort and reducing back strain. They sit on top of the original bottom clamp and sets of longer bolts are supplied to secure the top clamp down.
These ABM 22mm Handlebar Risers are available in 5 different heights of 20mm, 25mm, 30mm, 40mm and 50mm, plus available in Silver or Black anodised colours.
Special Order 10-14 days for delivery..
Measured to the centre point of the handlebar.
The Short Handlebar Risers from Oberon Performance are CNC milled from T6 aluminium, these billet risers will enhance your riding pleasure by raising the bar to a much more comfortable position.
The Tall Handlebar Risers from Oberon Performance are CNC milled from T6 aluminium, these billet risers will enhance your riding pleasure by raising the bar 64mm to a much more comfortable position.
The Tall Handlebar Risers from Oberon Performance are CNC milled from T6 aluminium, these billet risers will enhance your riding pleasure by raising the bar at a 20 degree rake to a much more comfortable position.
These Fat Bar SW-Motech Bar Backs are for motorcycles using handlebars with a Ø 28 mm centre section. If you find it difficult to comfortably reach the handlebar, you should consider purchasing a bar back. Our durable aluminum bar backs relocate the handlebar 30 mm up and 22 mm back.
That adjustment adds more comfort during longer trips.
You may need longer cables etc please check for slack before buying..
These Fat Bar SW-Motech Bar Backs are for KTM models using handlebars with a Ø 28 mm centre section. If you find it difficult to comfortably reach the handlebar, you should consider purchasing a bar back. Our durable aluminum bar backs relocate the handlebar 30 mm up and 22 mm back.
These universal (please check bolt spacing) SW-Motech Bar Backs are for handlebars with a Ø 22 mm centre section. If you find it difficult to comfortably reach the handlebar, you should consider purchasing a bar back. Our durable aluminum bar backs relocate the handlebar 30 mm up and 21 mm back.
These ABM Fat Bar Risers are made from high quality engineers CNC Aluminium, they allow fitment of 28.6mm Fat Bars to ABM yokes.
These Bike Specific ABM Fat Bar Risers are made from high quality engineers CNC Aluminium, they allow fitment of 28.5mm Fat Bars to original yokes with bike specific kits.
These ABM Fat Bar Risers are made from high quality engineers CNC Aluminium, they allow fitment of 28.6mm Fat Bars.
These Fat Bar SW-Motech Bar Backs are for BMW R1200 GS and R1250 GS models using handlebars with a Ø 32 mm centre section. If you find it difficult to comfortably reach the handlebar, you should consider purchasing a bar back. Our durable aluminum bar backs relocate the handlebar 32 mm up and 25 mm backwards or of course forwards.
No extension to cables required..
These Fat Bar SW-Motech Bar Backs are for BMW S1000 XR 2016 onwards models using handlebars with a Ø 32 mm centre section. If you find it difficult to comfortably reach the handlebar, you should consider purchasing a bar back. Our durable aluminum bar backs relocate the handlebar 32 mm up and 25 mm backwards or of course forwards.
These bolt-on risers from Motone Customs are a direct replacement for the stock riser clamp assembly which works on any of the Triumph Bonneville family.
These High End 125mm Aluminium Handlebar Risers are produced for 1 Inch (25.4mm) handlebars and can be cranked through a maximum of 45 degrees. They have a highly polished finish with detail lines and M12 60mm mounting bolts.
