These 5W 12V Glass Cap Wedge Bulbs are 10mm in diameter and 27mm overall length.
5mm LED motorcycle or ATV dashboard warning lights, with cable and mounting clip, for 12 volt DC. Amber. red, blue or green colours available.
Please enter number required in boxes below (numerics)
10mm LED motorcycle or ATV dashboard warning lights, with cable and mounting clip, for 12 volt DC. Amber. red, blue or green colours available.
The ultra compact Motogadget Push Button Mini Switch is used for operating and setting all instruments. Designed for you to enclose in a housing.
These 18mm Head Diameter and M14 thread dashboard warning lights are available as the following
These Motorcycle Dashboard Warning Lights come with a plastic washer and a metal nut. Available in blue high beam, red oil and green indicator versions. Please check legality in your country.
Motogadget Replacement 4x Standard Speedometer Sensor Magnets are spare parts in case of using dry reed contacts as speedometer sensors.
Koso replacement magnets for speedometer pickup sensors.
KOSO push button X1 with handlebar clamp for 1 inch and 7/8 inch ( 22 mm), with mini plug for various Koso instruments or the plug can be removed for universal (horn, etc.)
Motogadget compact push button switch for operating and controlling all instruments. Also used as replacement push-button for the m-Switch.
The push-buttons are a high quality, very robust design and vibration- and spraywater proof (IP65). The ergonomic pressure point provides feedback when operating.
The Motoscope Pro Ambient Air Temperature Sensor for ambient temperature measurement.
Attention: This sensor is especially for use with the motoscope pro and its Breakoutbox B!
Motogadget Air temperature sensor for ambient temperature measurement. For use with classic series.
Koso Speedometer Cable Signal Converter with normal mini-plug. Fits to most Japanese motorcycles with a speedometer cable.
Oxford Micro Waterproof Digital Motorbike Clock Temperature Gauge is a miniaturised clock with velcro patch fitting and backlit display.
Koso Speedometer Cable Signal Converter with a water proof JST Type A Plug. Fits to most Japanese motorcycles with a speedometer cable.
Motogadget Spares M5 Reed Contact Speedometer Sensor is a highly compact M5 reed contact is a spare part for the included speedometer sensors.
The stainless steel reed contact fits all motogadget instruments.
All 80mm instruments of the Motogadget Motoscope Classic series can be mounted with the mounting bracket msc. It is used if the backside of the instrument is covered (e.g. if embedded into a console, a cockpit or a lamp).
In most of the described cases, this more affordable mount is sufficient to wedge the instrument tight.
Motogadget Oil and Water Temperature Sensors in a variety of sizes and threads.
This new indicator light kit was developed for the DB-02 & DB-02R gauges. Unlike the other indicator light kits on the market our model will allow you to build it according to your needs.
12 different symbols to choose from for the 8 fitted lights to match your bike functions.
Digital dash not included
MotoGP Digital Motorbike Tyre Pressure Gauge, correct tyre pressures are essential for safe and successful Motorbike riding. Maintaining correct tyre pressure also ensures optimum fuel usage and tyre life.
The MotoGP Tyre Pressure Monitor allows any user to easily maintain tyre pressure.
KOSO Passive Speed Sensor for BMW Honda or Triumph models as listed below, the cable length is approx. 90 cm
Koso water temperature sensor adaptor for the range of Koso gauges with a water temperature display, designed to be fitted inline within one of the water hoses.
Diameters available 14, 16, 18, 22 and 26 mm.
Set includes 2 clamps, one adaptor and one sensor.
A range of JMT brand Oil Filler Plug Motorcycle Oil Temperature Gauges designed to replace the original oil filler cap on a large range of motorbikes.
Part supplied is correct thread and dipstick length, generic images used.
The display can be rotated in the adapter to the desired position. For optimal needle damping the stainless steel indicator face is filled with oil and rubber mounted in the adapter. The air bubble in the damping oil is for pressure compensation due to thermal fluctuations.
The Motoscope Classic msc A black mounting bracket is designed for mounting all the Motogadget Classic series speedometers and tachometers.
Universal aluminium mounting bracket, black anodized - for the motoscope classic and Chronoclassic series.
Total length: 185 mm, width: 85 mm (for custom cutting and drilling).
Must be mounted with msc A outer cup.
The Motoscope Classic msc C mounting bracket is designed for mounting all the Motogadget 80mm Classic series speedometers and tachometers.
Universal aluminium mounting bracket, brushed and anodized black - for the motoscope classic and Chronoclassic series.
Overall length 185 mm, width 120 mm (for custom cutting and drilling).
The Oxford High Specification Analogue Motorbike Clock has been designed specifically for use on Motorbikes, from the ground up.
Tough alloy & stainless steel construction with hardened mineral glass
Designed & tested to endure vibration, heat, and extreme weather
250 hour salt spray test to standard ASTM B117
Water resistant to 3 ATM or 30 meters
Mounting Bracket A for the Motogadget Motoscope Pro Speedometer Gauge
The outer cup mst A is used for mounting of all tiny series speedometers. It is flush with the instrument bezel and the outside edge of the mounting bracket mst A.
It is also possible to use it for wedge-mounting of the speedometer e.g. to a mounting bracket with 49 mm opening.
Gauges for easy balancing of Motorbike carburettors, includes brass connecting rods, rubber pipe and baffle valves.
Available as 2 Gauges for Singles !! or Twin cylinders...
Or 4 Gauges for twins, triples or four cylinders.
Motogadget Ignition signal sensor (rev signal) used for nearly all capacitor discharge ignitions and other ignitions with poor quality ignition signals.
All 80mm Motogadget Motoscope Classic series speedometers are mounted with the outer cup msc A. It is flush with the bezel of the instrument and the outer rim of the bracket.
If using mounting brackets msc A or msc B, the outer cup is always required to wedge the instrument tight against the bracket.
The BikeIt Trackday Motorbike Digital Lap Timer is a simple and reliable lap-timing unit for all race and practice purposes. It comes with a wireless I.R. transmitter and has a compact and lightweight design. The LCD receiver is easily mounted to road and off-road motorcycle, karts, cars and cycles.
Motogadget Oil pressure sensor for oil pressure measurement at engine. Only applicable with the appropriate Motogadget instruments.
In connection with the Combi Frame, the Motogadget Handle Bar Clip-Kit Bracket is used to mount the motoscope mini to the handlebar.
You need three items in total, the Motoscope Mini speedometer, the combi frame and the combi frame mounting brackets.
It is not required to drill the handlebar.
This 57mm wide LED based Highsider Telltale Motorcycle Warning Light Cluster comes in a black anodized or chromed CNC-milled Aluminium housing with a built in smoked lens.
This Daytona Alpha Micro LED Motorcycle Warning Light Strip comes with 5 LED indicators which feature 2x indicator turn signal, high beam, neutral and oil pressure.