These 5W 12V Glass Cap Wedge Bulbs are 10mm in diameter and 27mm overall length.
Individual Motorcycle 12v Indicator Light Bulbs Amber or Clear 15mm base and 23w or 10w available..
All have pins 180 degrees apart and same level on sides.
These asbestos free Motorcycle Exhaust to Header Gaskets are available in a range of sizes from 26mm to 62mm outside diameter.
Silicon-Power-Diode 5A, (U) 50V, blocking-diode. When adding LED rear tail light / turn signal combinations in addition to bulb original tail lights, it can happen that a small leakage current flows from the brake line, when the Rear light cable is connected or vice versa.
For example we have just had an supplementary LED rear light switch off when the brake light cables are connected.
To prevent this, a 5A blocking diode in series is connected to the brake light cable in a way that the current can flow to the new LED tail light but not back. The silver bar on the diode marks the direction to where the electricity can flow.
These 40mm x 90mm Self Adhesive or Screw On Rectangular Red Rear Reflectors are supplied individually and are e-marked.
Halogen BAY9S 12v 21w Indicator Bulb E-Marked with clear glass.
A range of Motorcycle 6v or 12v Rear Stop and Tail Light Bulbs 21/5w and 23/8w available..
These Motorbike Headlight Bracket Spacers come as a pair. They are made of black plastic and measure 28mm diameter and 10mm thick. The internal diameter is 10mm.
The Oxford Minder Motorcycle Disc Lock Reminder Cable attaches one end to your disc lock and the other to your handlebars.
Saves looking like a plonker in town by forgetting to remove your lock...
Headlight Lens Retaining W Clips Pack of 3, secures headlight lens to inner of the headlight rim.
5mm LED motorcycle or ATV dashboard warning lights, with cable and mounting clip, for 12 volt DC. Amber. red, blue or green colours available.
A selection of Motorbike M8 and M10 Mirror Adapters with left and right hand threads.
Sold individually please order 2 for a pair..
Please click for details..
These HIGHSIDER plastic cover sleeves for M8 indicator mounting bolts come as a pack of 4, after a new indicator installation you can cover the indicator bolts with help of plastic sleeves for a better finish and corrosion protection.
A range of extensions, mount converters and brackets for the Kellermann Atto range of miniature LED Motorcycle Indicators and Stop and Tail Light.
10mm LED motorcycle or ATV dashboard warning lights, with cable and mounting clip, for 12 volt DC. Amber. red, blue or green colours available.
BikeIt Motorcycle Balaclavas are made from a double seamed construction and come in 3 versions, Synthetic Silk, Thermal Cotton and Thermal Cotton 2 Eye.
E-marked reflector which is suitable for the Highsider range of tail tidies, rectangular with a reflector surface of 85 x 30 mm.
With an M5 threaded bolt for mounting.
BikeIt Thermal Cotton Motorcycle Inner Gloves One Size offer extra warmth under motorcycle or scooter gloves.
These 20mm self adhesive round rear reflectors come as a pair.
The ultra compact Motogadget Push Button Mini Switch is used for operating and setting all instruments. Designed for you to enclose in a housing.
These flat profile Oxford Bungie Xtra Flat Motorcycle Straps can be attached to secure mounting points, such as dedicated luggage hooks, solid footrest brackets or parts of the motorcycle frame.
Their flat profile spreads the load over surface reducing the chafing effect, we still recommend using and Oxford Luggage Blanket over painted surfaces though.
These Motorcycle Dashboard Warning Lights come with a plastic washer and a metal nut. Available in blue high beam, red oil and green indicator versions. Please check legality in your country.
Oxford InsuLever Lever Sleeves provide essential insulation against cold weather which would otherwise chill your levers.
These 22mm x 94mm long amber self adhesive side reflectors come as a pair and are E-marked.
These 22mm x 94mm long red self adhesive rear reflectors come as a pair and are E-marked.
T-Bracket extension to fix your reflector to Highsider Number Plate Brackets
These 18mm Head Diameter and M14 thread dashboard warning lights are available as the following
12v 2w consumption
This Shin Yo M8 Mirror Adaptor for Harley Davidson Motorcycles is used to mount mirror stems with an M8 x 1.25 tapped blind hole to Harley Davidson motorbikes.
Soft rubber 250mm Motorcycle Mud Flap and Fitting Kit
These 20mm round rear reflectors come as a pair and are mounted using an 8mm bolt and wing or butterfly nut.
OVER 50% DISCOUNT, REDUCED FROM £21.99!
High Quality Shin Yo STURGIS Right-Hand Custom Mirror
Mirror Dimensions (W) x (H): 110mm x 30mm
FURTHER BULK DISCOUNT ALSO AVAILABLE, CONTACT FOR DETAILS!
DISCOUNT WILL BE APPLIED AT CHECKOUT
LED Motorbike indicators work with a lower wattage than standard bulb type indicators. To avoid rapid flashing it may be necessary to replace the existing relay with a specially designed LED relay correcting the wattage.
If you are only changing one pair of indicators eg the rear, you can use inline resistors, these are required for each indicator.
The selection you make below changes the image to show that choice..
Converts Black Universal M10 mirrors for use with Yamahas left hand thread on the right hand mirror mount.
Left hand Yamaha mirrors have a right hand thread, right hand Yamaha mirrors have a reversed anti-clockwise thread.
The right hand adaptors in this kit will allow a universal 10mm standard thread mirror to be attached. It has a 10mm reverse thread at the base, and in iternal 10mm thread at the top.
Provided as pair
Converts Universal M10 mirrors for use with Yamahas left hand thread on the right hand mirror mount !!
Individually available motorcycle cleaning brushes in a variety of shapes and sizes, with tough impact resistant handles, with either soft or ultra stiff nylon bristles depending upon the intended use.
Available in two sizes; 10cm or 15cm diameter
Highsider CNC Mirror Mounting Hole Cap M10 Black made of aluminium is a cover for original M10 mirror thread. For a beautiful finish and corrosion protection. The rubber at the cylinder ensure a good fit. Well suited for handlebar end mirror upgrade.
Indicator winker stem for various HONDA and KAWASAKI motorcycles, supplied individually please order 2 for a pair.
Pairs of motorcycle fairing indicator spacers in bike specific shapes and sizes. These allow you to bridge the gap when replacing bulky original indicators with neater and smaller aftermarket sets.
Please click the image above to go to the detail page for dimensions.
Motorcycle Exhaust Silencer Can Banjo Clamps for securing silencers to link pipes and down pipes. Chromed finish and available in 29mm to 68mm size ranges..
This Motogadget supplied AMP-Style 6-pin Supersealed Connector comes as a complete kit with the six male and female pins.
Muc-Off Premium Microfibre Motorcycle Bodywork and Fairing Polishing Cloth contains an amazing 'split-fibre' technology that increases surface area absorbency, eliminates smears or blemishes
These are Oxford Wheel Stripes, they are 7mm wide motorcycle rim tapes in a unique pre-curved four part design. Sufficient length for two 17" wheels. Available in five different colours.
Simple and easy to use - pump action spray for quick coverage.
Available in two sizes to fit 28-36mm diameter grips
LED Rear Light Can-Bus Compensator Resistor Lead for motorbikes with CAN-bus electrical system such as the BMW R1200GS which may show an error if a LED tail light is mounted.
Save cutting wires by using these indicator adapter leads which convert from OEM plugs to aftermarket bullet connectors.
This 18mm Diameter Shin Yo Micro Pin LED Motorcycle Front Position Light is designed to be built in to bodywork. It is supplied singularly and has a smoked finish.