Motor Cycle Accessories
Tel: 01637 880530

Products


 

Our products

Home » Manufacturers » Motogadget
 
Sort Products
Items per Page
Search this page:
« Previous | 1 | 2 | 3 | »
Motogadget Push Button Mini Switch

The ultra compact Motogadget Push Button Mini Switch is used for operating and setting all instruments. Designed for you to enclose in a housing.

  • Length 16 mm, bore diameter 5 mm
Price: £3.99
Motogadget
4.55 EUR 5.57 USD
Motogadget Supersealed Connector AMP~Style 6~pin

This Motogadget supplied AMP-Style 6-pin Supersealed Connector comes as a complete kit with the six male and female pins.

The Supersealed series 6-pin connector kit is a highly robust, water-tight plug-in connector. 
Parts included are male and female connector housings, matching crimp-on pins and wiring insulation.
Price: £6.99
Motogadget
7.98 EUR 9.76 USD
Motogadget Spares 4x Standard Speedometer Sensor Magnets

Motogadget Replacement 4x Standard Speedometer Sensor Magnets are spare parts in case of using dry reed contacts as speedometer sensors.

  • 4 x spare magnet (neodymium), 5x2 mm
Price: £7.99
Motogadget
9.12 EUR 11.16 USD
Motogadget M~Lock Replacement Key Fob

Motogadget M-Lock Replacement Programmable Key Fob in their traditional tear drop shape.

  • One supplied
  • Needs original red fob to enable programming
Price: £11.99
Motogadget
13.68 EUR 16.74 USD
Motogadget m~Lock Glass Tube Reed Key for m~Lock RFID Ignition Switch

The Glass Tube Key is a tiny glass tube used as an alternative key (user key) for the m-Lock RFID ignition lock.

  • Euro not included !
Price: £14.99
Motogadget
17.10 EUR 20.93 USD
Motogadget m~Lock BackCapacitor
The m.lock backup capacitor is used to level short-term voltage drops to the main relay, mainly used with large engines or starters requiring a high current from the battery, to prevent m-lock dropouts... 
 
If cranking the engine via the electrical starter is slow and resistive, very large single cylinder capacities or high compressions can cause significant voltage drops. Implementing a backup capacitor prevents short-term voltage drops from de-energizing the main relay. 
Excessive voltage drops can only be prevented by an optimal, sufficiently powerful battery and the lowest possible resistance in the vehicles electrical cables.
Price: £14.99
Motogadget
17.10 EUR 20.93 USD
Motogadget Compact Push Button Switch

Motogadget compact push button switch for operating and controlling all instruments. Also used as replacement push-button for the m-Switch.

The push-buttons are a high quality, very robust design and vibration- and spraywater proof (IP65). The ergonomic pressure point provides feedback when operating.

  • Total length 22.7 mm, installation length 15.5 mm, installation diameter 12 mm
  • Available in either black or stainless
Price: £14.99
Motogadget
17.10 EUR 20.93 USD
Motogadget Motoscope Classic Stainless Steel MSC Mounting Bracket

All 80mm instruments of the Motogadget Motoscope Classic series can be mounted with the mounting bracket msc. It is used if the backside of the instrument is covered (e.g. if embedded into a console, a cockpit or a lamp).

In most of the described cases, this more affordable mount is sufficient to wedge the instrument tight.

Price: £18.99
Motogadget
21.67 EUR 26.52 USD
Motoscope Pro Ambient Air Temperature Sensor

The Motoscope Pro Ambient Air Temperature Sensor for ambient temperature measurement. 

Attention: This sensor is especially for use with the motoscope pro and its Breakoutbox B!

Price: £18.99
Motogadget
21.67 EUR 26.52 USD
Motogadget Air Temperature Sensor

Motogadget Air temperature sensor for ambient temperature measurement. For use with classic series.

Price: £18.99
Motogadget
21.67 EUR 26.52 USD
Motogadget Oil and Water Temperature Sensors

Motogadget Oil and Water Temperature Sensors in a variety of sizes and threads.

Price: £19.99
Motogadget
22.81 EUR 27.92 USD
Motogadget Motoscope Classic msc A Mounting Bracket

The Motoscope Classic msc A black mounting bracket is designed for mounting all the Motogadget Classic series speedometers and tachometers.

Universal aluminium mounting bracket, black anodized - for the motoscope classic and Chronoclassic series.

Total length: 185 mm, width: 85 mm (for custom cutting and drilling).

Must be mounted with msc A outer cup.

Price: £21.99
Motogadget
25.09 EUR 30.71 USD
Motogadget Motoscope Classic msc B Mounting Bracket

The Motoscope Classic msc B mounting bracket is designed for mounting all the Motogadget Classic series speedometers and tachometers.

In this configuration, the instrument is screwed directly into the bracket (with or without outer cup).

Universal aluminium mounting bracket, brushed and anodized.

Total length: 185 mm, width: 85 mm (for custom cutting and drilling).

Price: £21.99
Motogadget
25.09 EUR 30.71 USD
Motogadget Motoscope Classic msc C Mounting Bracket

The Motoscope Classic msc C mounting bracket is designed for mounting all the Motogadget 80mm Classic series speedometers and tachometers.

Universal aluminium mounting bracket, brushed and anodized black - for the motoscope classic and Chronoclassic series.

Overall length 185 mm, width 120 mm (for custom cutting and drilling).

Must be mounted with msc A outer cup.

Price: £23.99
Motogadget
27.37 EUR 33.50 USD
Motogadget m~relay Standard 20A Switching Relay
The m-Relay is a very compact relay able to operate almost all appliances.
 
High or low beam, horn, ignition etc. can be switched easily and almost lossless. Higher current loads are put closer to the appliance (e.g. lights). Ignition lock and/or handlebar switch only have to bear a minimal pilot current load. Failures and burned contact pins are a thing of the past! Due to minimized conductor loss, e.g. beam brightness is significantly increased - additional safety!
Price: £23.99
Motogadget
27.37 EUR 33.50 USD
Motogadget Motoscope Tiny Mounting Bracket A
The Motogadget Motoscope Tiny Mounting Bracket MST A is used for mounting of all tiny series speedometers. The bracket can be cut and drilled, as required. 
 
Length 133 mm, width 53 mm.

 

Price: £23.99
Motogadget
27.37 EUR 33.50 USD
Motogadget Motoscope Mini Bracket A
The msm Mounting Bracket A is used for mounting the motoscope mini (without indicator lights). It is made of precisely laser-cut, anodized or mirror polished aluminium. Used for custom cutting, drilling and adaptations. 
 
Maximum width is 90 mm.
Price: £24.99
Motogadget
28.51 EUR 34.90 USD
Motogadget Motoscope Mini Bracket C
The msm Mounting Bracket C is used for mounting the motoscope mini with the motosign mini series indicator lights. It is made of precisely laser-cut, anodized or mirror polished aluminium. Used for custom cutting, drilling and adaptations. 
 
Maximum width is 90 mm.
 
Price: £24.99
Motogadget
28.51 EUR 34.90 USD
Motogadget Spares M5 Reed Contact Speedometer Sensor

Motogadget Spares M5 Reed Contact Speedometer Sensor is a highly compact M5 reed contact is a spare part for the included speedometer sensors.

The stainless steel reed contact fits all motogadget instruments.

  • Industrial-grade quality (IP68). Used to detect magnets on rotating parts.
  • M5 x 0,5 fine-pitch thread, length 22 mm, incl. 2 nuts. Cable length 150 cm.
  • 2 small high capacity neodymium magnets included.
Price: £24.99
Motogadget
28.51 EUR 34.90 USD
Motogadget Motoscope Pro Mounting Bracket A

Mounting Bracket A for the Motogadget Motoscope Pro Speedometer Gauge

Price: £25.99
Motogadget
29.66 EUR 36.29 USD
Motogadget Motoscope Mini Combi Universal Mounting Bracket
The anodized aluminium msm combi mounting bracket allows for easy mounting of the Motogadget Motoscope Mini combi frame to the triple clamp or similar even parts. For custom cutting and drilling. Instrument and msm combi frame not included. Please order separately. 
 
It is 130mm long and 33mm wide at the bottom.
 
Price: £27.99
Motogadget
31.94 EUR 39.09 USD
Motogadget m~Grip Soft Rubber Open Ended Handlebar Grips

These Motogadget m-Grip soft rubber open ended handlebar grips are available for 22mm (7/8") or 25mm (1") handlebars.

They are designed to complement the Motogadget range of bar end m-blaze and m-disc indicators.  

 

 

Price: £27.99
Motogadget
31.94 EUR 39.09 USD
Motogadget m~Flash Digital Flasher Indicator Relay

This Motogadget m-Flash Digital Flasher Indicator Relay is by far the most compact load independent flasher relay on the market.
Nothing comes close in size and simplicity! The m-Flash flasher unit substitutes all conventional flasher relays.

Dimensions:
Casing (L x W x H): 18 mm x 13 mm x 9.5 mm
Connector cable length: approx. 2 x 50 mm
Weight: approx. 4 g

Attention: If you are looking for a flasher relay with automatic deactivation please refer to our m-Stop series!

Instruction Manual Please Read

Price: £29.99
Motogadget
34.22 EUR 41.88 USD
Motoscope Tiny Outer Mounting Cup MST A

The outer cup mst A is used for mounting of all tiny series speedometers. It is flush with the instrument bezel and the outside edge of the mounting bracket mst A.

It is also possible to use it for wedge-mounting of the speedometer e.g. to a mounting bracket with 49 mm opening.

  • Available anodised black or polished finish

 

Price: £30.99
Motogadget
35.36 EUR 43.28 USD
Motogadget Motoscope Classic msc Triumph Mounting Bracket

The Motogadget Motoscope Classic msc Triumph mounting bracket is a special bracket to mount the motoscope classic and Chronoclassic series at the triple clamp of Triumph Retro Twins using the original holes and bolts. 

 
Milled precisely from billet Aluminium and anodized black.
Price: £32.99
Motogadget
37.64 EUR 46.07 USD
Motogadget Motoscope Tiny Triumph Bonneville Thruxton Mounting Bracket

The Motogadget Motoscope Tiny Triumph Bonneville Thruxton Mounting Bracket is a special bracket to mount the motoscope tiny series at the top yoke triple clamp of Triumph Retro Twins using the original holes and bolts. 

Milled precisely from billet aluminium and anodized black.

 

Price: £32.99
Motogadget
37.64 EUR 46.07 USD
Motogadget Spares M5 Inductive Proximity Speedometer Sensor
These M5 fitting inductive proximity sensors can be deployed as alternative speedometer sensor on all our instruments. They requires NO magnets to pick up impulses.
 
Usually it is just pointed at big rotating metal parts. Depending on the type of motorbike, adjustment is more demanding as is the adjustment of e.g. Dry-Reed contacts.
 
M5 threading, 25 mm length, 2 nuts included. Cable length 150 cm
 
ATTENTION: 9007045 is the speed sensor with NEGATIVE/GROUND signal and is used with Motogadgets latest instruments. Please check with your manual, what signal your speedo input expects if fitting to an older gauge.
 
If you need a positive signal please select speedo sensor with positive signal - part no. 9007046
Price: £32.99
Motogadget
37.64 EUR 46.07 USD
Motogadget Push Button Switch Kit M12 Black

Motogadget Push Button Switch Kit M12 is finished in Black comprises a push button with M12 thread, a black anodized sleeve, a black anodized bracket and the connection cable.

It's easy to bolt it on at the handle bar with the clamp of a master cylinder or a mirror.

  • The Push Button Kit provides a sturdy and water resistant solution with a good quality push button.
  • It is unobtrusive and can be used for all our instruments and a lot of other applications.
Price: £33.99
Motogadget
38.78 EUR 47.47 USD
Motogadget m~Wave Fading Digital Flasher Indicator Relay

This Motogadget m-Wave Fade In Fade Out Digital Flasher Indicator Relay is the world's first digital flasher relay with fade-in/fade-out effect. Furthermore, it is very compact and load independent.


Every flasher light model is faded in and out smoothly - even LEDs! Brand new style and looks for your turn signal. 
While conventional hard switching flashers - especially LED models - only switch on and off blandly, your m-Wave oscillates in a fascinating wave pattern! Flasher lights in a revolutionary new design - ultra compact and light. Basically just a piece of wire with a tiny candy-sized device. Ideal to draw more attention to all kinds of modded or styled motorbikes and cars.

Instruction Manual Please Read

Price: £34.99
Motogadget
39.93 EUR 48.86 USD
Motogadget Breakout Box A for the Motoscope Pro Dash
All Motoscope Pro indicator and warning light cables are connected to this msp Breakout Box A.
Convenient screw-type terminals make child's play of the interconnections. The compact dimensions facilitate hidden mounting of the box and the numerous cables connected to it anywhere on the vehicle.
 
If you wish to use the temperature and oil pressure etc features then please use the Breakout Box B
 
Price: £34.99
Motogadget
39.93 EUR 48.86 USD
Motogadget Ignition Signal Tachometer Sensor

Motogadget Ignition signal sensor (rev signal) used for nearly all capacitor discharge ignitions and other ignitions with poor quality ignition signals.

  • Directly mounted to the ignition cable (high voltage cable).
  • Not applicable for plug top coils / pencil coils.
Price: £34.99
Motogadget
39.93 EUR 48.86 USD
Outer Mounting Cup A for Motoscope Classic Series

All 80mm Motogadget Motoscope Classic series speedometers are mounted with the outer cup msc A. It is flush with the bezel of the instrument and the outer rim of the bracket.

If using mounting brackets msc A or msc B, the outer cup is always required to wedge the instrument tight against the bracket.

Price: £36.99
Motogadget
42.21 EUR 51.65 USD
Motogadget MSM Combi 22mm Handlebar bolt~on~bracket
In connection with the combi Frame, this Handle Bar Bolt-On Bracket is used to mount the motoscope mini to the handlebar. The handlebar has to be drilled.
 
Available in 22mm, 1" or 28.6mm fat bar handlebar diameter versions and black anodised or polished finishes.
Price: £37.99
Motogadget
43.35 EUR 53.05 USD
Motogadget M8 Dry Reed Contact Speedometer Sensor
The extra heavy-duty, robust speedometer sensor in dry reed contact design (M8). Used for sensor replacement for motoscope rally. Also applicable for all other motogadget instruments. 
  • Used to detect magnets on rotating parts.
  • M8 thread, 
  • length 30 mm, 
  • incl. 2 nuts. 
  • Cable length 115 cm.
Price: £38.95
Motogadget
44.44 EUR 54.39 USD
Motogadget m~Stop Digital Brake Light Modulator

Motogadget m-Stop, the tunable digital brake light modulator for higher road safety. Various flashing modes turn conventional brake lights into an eye-catching hazard light. Successive vehicles can much quicker identify the activated brakes of a leading motorbike. A considerable plus in motorbike safety as bikes are prone to be overlooked. This is especially true with custom bikes and mods with either small or low riding brake lights.

Higher end cars already use this technology (adaptive brake lights).
Very common in other countries such as the USA. Unfortunately not (yet) approved in Germany.

Price: £39.99
Motogadget
45.63 EUR 55.84 USD
Motogadget MSP Bracket for Motoscope Pro BMW R9T
This bracket is designed for the Motoscope Pro to be fitted to the BMW R9T. It is machined from Aluminium and black anodized.
 
The eye-catching shape with a material thickness of 3,5 mm, the machined grooves and the chamfers gives it a light weight but rigid look.
All bolt holes are precisely drilled. The original bolts can still be used with it.
 
Length 116 mm, width 100,85 mm, hight 34 mm, material thickness 3,5mm
 
Price: £43.99
Motogadget
50.19 EUR 61.43 USD
Motogadget Motoscope Tiny Weld In Stainless Mounting Cup
The Motogadget Motoscope Tiny Weld In Mounting Cup (stainless steel) to enable embedding of the tiny series gauges into the petrol tank or welding it e.g. to the handlebar.

 

Price: £43.99
Motogadget
50.19 EUR 61.43 USD
Motogadget Motoscope Mini Weld in Bracket
Motogadget Motoscope Mini Weld-in Cup in stainless steel for facilitated embedding of the motoscope mini into the tank or weld-mounting it onto the handlebar.
Price: £44.99
Motogadget
51.34 EUR 62.83 USD
Motogadget m~Button for m~Unit Motorcycle Digital Controller

Motogadget m-Button for m-Unit V2 and the new m-Unit Blue Motorcycle Digital Controllers, another innovation from motogadget. It's a big help - must be used in combination with the m-Unit - in reducing 'cable clutter' and simplifying wiring harnesses.

  • Integrated into the handlebar tube - or any other adequate location - this tiny cylinder will electrically connect all handlebar instruments, switches and buttons.
  • Using state-of-the-art bus technology, the m-Button digitally processes signals and transmits them to the m-Unit over a thin cable.
  • The electrical consumers will then be switched inside the m-Unit.
  • All control wires are moved into the handlebar. This saves space, weight, labour and time. A 'must have' for custom bikes with clean-look handlebars.
  • Will not work without the m-Unit
Price: £44.99
Motogadget
51.34 EUR 62.83 USD
Motogadget M10 Oil Pressure Sensor

Motogadget Oil pressure sensor for oil pressure measurement at engine.  Only applicable with the appropriate Motogadget instruments.

  • Not applicable for oil warning lights (in this case, standard use is a oil pressure switch).
  • M10x1 self-sealing thread.
  • Total length incl. thread and terminals 80 mm, diameter max. 46 mm.
Price: £49.99
Motogadget
57.04 EUR 69.81 USD
« Previous | 1 | 2 | 3 | »
 

Your Cart

0 Product(s) in cart
Total £0.00
 

Catalogue Downloads

catalogue download page
 
Payments By
  • Secure payments by paypal
  • PayPal Express
  • Prices include 20% VAT
    VAT for none EU countries will be removed at checkout