This Muller Internal Throttle Mechanism is for use on 1" handlebars, the fitting of which involves cuttimg a length off your handlebar and repalcimng with the Muller mechanism. It can be a complicated procedure which we advise you entrust to a mechanic and use the drill template offered as an extra..
Please allow 10-14 days for UK delivery
-
Unique: 6 bearings with four ball and two plain bearings
-
Precise: manufactured with an accuracy of hundredths of a millimeter for minimal play
-
Incredibly light: thanks to the special Bowden cable, absolutely smooth-running even with the most extreme Z-links and APE hangers
Facts:
-
Smooth ease of movement
-
Sophisticated technology - utility model protected
-
Handlebar end indicators can be installed eg Motogadget and Kellermann
-
Suitable for aluminum and rubber grips (both 1")
-
For all inch handlebars with open cable entry point
-
With throttle adjustment screw - for easy readjustment of the throttle cable clearance
Delivery includes a 135cm special Bowden cable, can be shortened as required.
The precision throttle grip shone with top marks in laboratory tests, endurance tests and TÜV strength tests. All parts have been carefully selected and guarantee the highest quality. Thanks to the flexible Teflon-coated Bowden cable, the throttle can be installed on even the most extreme handlebars and still guarantees excellent ease of movement.
The double-guided ball bearings on two sides ensure an even pull on the throttle. All common handlebar end indicators can be installed, such as Kellermann and motogadget. In connection with the m-Blaze indicators e.g. you get a very subtle, clean front end.
We recommend having the installation carried out by a specialist workshop!
We offer a special assembly guide kit for workshops and experienced hobbyists. This makes cutting off the handlebar and drilling holes much easier.
Note
Due to frequent inquiries, we would like to inform you that the strength report supplied is a certificate that our throttle can withstand the requirements of such a component and that the strength is guaranteed. It is not a TÜV certificate in the conventional sense! Please do not drive up to the TÜV and ask for an entry!
Information / requirements for assembly
Handlebar required with cable duct
The groove for fitting the fitting may begin at 150 mm at the earliest (measured from the right end of the handlebar). => We know from experience that this is not possible with some Fehling handlebars!
During assembly, the original right twist tube is omitted, therefore a second left hand 1" grip is required for the right hand side.
=> We recommend our aluminum handles for internal throttle cables
