MotorCycle Accessories
Tel: 01637 880530
Login Status  
Not logged in
  » Login

Products


 

Product Details

Home » » » All Products
Motogadget m~Unit Blue Bluetooth Motorcycle Digital Controller and Fuse Box

Motogadget m~Unit Blue Bluetooth Motorcycle Digital Controller and Fuse Box

The new m.unit blue bluetooth motorcycle control unit from Motogadget. Compared to the proven previous version (m-unit v.2) this has been evolved and improved significantly. Now you have 12 inputs and 10 outputs, higher quality cable clamps and especially now a Bluetooth® LE (Low Energy) interface.
This can talk to the blue m.unit directly with our app 'm.ride' on your your smart phone (please see compatibility below). This functionality is unique in the accessories area for motorbikes. 
 
The entire setup and the alarm system can be controlled via the m.ride app. Also an error diagnosis is possible during operation and without dismantling m.unit. Also can use a secure, encrypted keyless go function. 
 
When activated, only the approach with the own smartphone to automatically turn on the on-board voltage and the bike is ready enough. 
 
The m.unit blue is the digital control unit for a motorcycle, the heart of the entire vehicle electrical system. They can be operated with button taps or with conventional switching handlebar controls. It switches all the necessary components on the vehicle and at the same time it takes over the tasks of electrical fuses. 
 
Relays and individual components in the wiring harness can be greatly reduced and it can be carried out a new, minimized wiring of the vehicle in the shortest possible time. 
 
When using the m.button the number of all switching fitting connectors is reduced to a single cable.
 

Functions WITHOUT smartphone and m.ride App

Full digital control button, 4-sensor or 5 button operation possible

  • Complete replacement of the fuse box. 10 independent circuits are digitally monitored and switched off when faults. After eliminating the fault, the safety function is automatically reset
  • Integrated, position-independent alarm
  • Integrated, digital, load independent flasher relay switch off feature and adjustable m.wave mode selectable
  • Integrated hazard warning system
  • Indicators can be optionally set as a position light (USA style)
  • integrated parking lights and headlight flasher
  • Control of high and low beam (up to 200 W switching capacity) with just one button
  • Integrated digital brake light modulator, programmable flashing mode
  • Acceleration controlled risk stop lamp (automatic alarm)
  • Integrated starter relay for starter with magnetic switch (up to 30 A switching capacity)
  • Intelligent and configurable control / disconnection of consumers to use the maximum starting power of the battery during the starting process can
  • Integrated digital horn relay
  • Two configurable auxiliary outputs AUX1 and AUX2
  • Diagnostic function for availability of input, output, switching state of the circuit, short-circuit diagnostics, etc.
  • Calibration and current measurement enables defect detection of all bulbs

Functions WITH smartphone and m.ride App

  • Encrypted connection via Bluetooth LE (Low Energy), thus tampering and low power consumption of smartphones and the blue m.unit
  • Keyless ignition (turning the electrical system through rapprochement with the own smartphone)
  • Transmission of alarm events (date, time, vehicle on the ground, etc.) to the app
  • Setting mode and sensitivity of the alarm system
  • Monitoring of the current battery voltage in the app
  • Diagnosis of all inputs and outputs, measurement of currents, voltage, device temperature
  • Error messages in real time as the audio output via the helmet headset.
  • Manual switching of outputs via smartphone (except Starter)
  • Firmware updates without dismantling anywhere via smartphone app
  • Configuration of the setup menu without removing any place via smart phone and App
  • Mileage input for adjustment of the vehicle odometer with m.ride allows vehicle management with automatic on maintenance tasks, condition of tires, chain, brake pads, oils, fuels, spark plugs etc.
  • Log records on rides and displays vehicle status, alarm events and maintenance tasks
  • Display of the parking position and Ping! to help with vehicle search
  • LIN bus connection available for subsequent connection of suitable motogadget products

Technical requirements

The app m.ride will shortly for Android for iOS available (version 5.0), and some time later (from iPhone 5) are available. For coupling m.unit blue with the smartphone modern Bluetooth LE is used. This requires certain conditions to the hardware of smartphones. 
 
At the moment the following Android models are compatible 
 
Samsung Galaxy S7 / S7 Edge
Samsung Galaxy S6/S6 Edge
Samsung Galaxy S5/S5 Neo
Samsung Galaxy S4
Samsung Galaxy Note 4
Samsung Galaxy Tab 4 7.0
Samsung Galaxy Tab S2 10.5
Google Pixel / Pixel XL
Google Nexus 5
Google Nexus 5X
LG G4
LG G5
Sony Experia Z3 Compact
OnePlus 3 / OnePlus 3T
Huawei P9/ P9 Plus
 
We try to make compatible more smartphone models in the next few weeks. Please understand that we define here priorities and not every device can be considered. 
 
Further information on the app under mride.de or in Google Play.
 
Items delivered
 
  • m.unit blue
  • 50cm connection cable for battery positive with 10 mm² cross-section
  • 2 cable eyes
  • 1 x M5 stainless steel screw
  • 2 x M5 stainless steel bolt with nut
  • 1 x speedo sensor with 2 magnets
  • Detailed installation and operating instructions

Specifications and features

  • L/B/H 101 x 61 x 28 mm
  • weight approx 180 g
  • attachment 2 x M5 stainless steel screws (installation and ground connection),
  • 1 x M5 screw terminal for Battery Plus
  • operating voltage 6 V - 20 V
  • operating temperature -20°... +80°C
  • inputs 1 x input (+ 12V connected) for ignition or m.lock 
 
11 x control input (negative / earth connected) for: 
  • Left indicator 
  • Right indicator 
  • low / high beams 
  • starter 
  • horn 
  • stoplight 
  • Killschalter 
  • stand switch 
  • LIN bus 
  • AUX1 
  • AUX2
 
outputs 10 x output (+ 12V) for: 
  • Left turn signal indicator
  • Right turn signal indicator
  • low beam 
  • high beam 
  • starter 
  • horn 
  • stoplight 
  • ignition 
  • AUX1 
  • AUX2
Price: £279.95
Quantity:
321.94 EUR 358.34 USD
UPC 4054783251339
 
Product Reviews

No Reviews For This Product.

Click to review this product

 
Payments By
  • Secure payments by paypal
  • PayPal Express
  • Prices include 20% VAT
    VAT for none EU countries will be removed at checkout