Axel Joost electronics box version C with 1 or 2 handle bar adapters, the available electronics boxes on the market all reduce the number of cables laid on the bike. This makes installation easier.
Nevertheless, it is amazing how much cable is left on the bike. Therefore, Axel Joost started the following development together with "Cafe Racer Kits" from England:
The universally applicable digital cable harness version C (The C stands for Communication ...) for key control goes a revolutionary new way:
A small control box on the handlebar, available with 1 or 2 handlebar adapters and a small control box on the rear part of the bike take over the entire control of the bike and "talk" through a thin serial line.
The load cables to the consumers are wired by the closer box. As a result, various cable meters are saved, the load lines to the consumers are shorter and the installation time is drastically reduced in a rebuild.
Dimensions: handlebar box: 40 mm length x 12.5 mm width x 25 mm height
Frame box: 50mm x 42mm x 12mm
Power consumption: maximum 7mA at 12V
Housing: Black impact-resistant ABS plastic, water-tight
Input voltage: 7 - 18 volts
Connections: Control inputs 0,1mm², power outputs 1 mm², each 20 cm
Maximum output current:
5 amps per output, 3 amps for horn output
Maximum ambient temperature: 80 degrees Celsius
Permissible current from the 12V connection: 20 amps