BikeTek Series 3 Motorcycle Paddock Stands allow easy and safe lifting of motorcycle front and rear wheels for most repair and maintenance jobs. Extra heavy duty construction, the stands are available in red finish.
Front supplied with “under fork” adaptors as standard, one side is height adjustable.
Rear supplied with “cup” adaptors as standard.

The BIKETEK Aluminium Race Paddock Stands are manufactured from ultra lightweight aluminium over-sized tubing offering a robust and sturdy build quality.

These are serious upgrades from standard steel paddock stands! The locking bobbin fork mounts and light weight make it especially suited for track and paddock use where speed and ease of use is essential.

Unique heavy weight hydraulic custom motorcycle lift, suitable to hoist unfaired motorcycles including choppers and cruisers, MX bikes and ATV’s.

Lowest clearance 15.5cm

Unique heavy weight hydraulic motorcycle lift, designed specifically to lift lower sitting framed bikes, perfect for Harley Davidsons.

Lowest clearance 13cm

The BikeTek Custom Cruiser Motorcycle Bike Raiser Stand is an adjustable height stand for flat-base or twin tubular motorcycle frames.
Simply locate the contact bar under the bike frame and lever backwards to the raised position.

The Biketek front motorcycle head stand folds out to enable a motorcycle to be lifted by the front steering head tube. This offers maximum access to the front end for all repair, cleaning and maintenance work.

Each stand is supplied with a kit of 5 of the most popular sized head lift pins covering 90% of motorcycles.

The BikeTek Heavy Duty MX Motocross Motorcycle Hydraulic Scissor Lift lifts bikes from 340mm to 890mm.

Max lift 135kgs

Foot lever operated

The BikeTek Heavy Duty MX Motocross Motorcycle steel foot lift is suitable for all offroad bikes from 60cc to 600cc +.

The BikeTek Hydraulic Motorcycle Workshop Table Lift is designed to enable efficient and safe access to motorcycles, allowing repairs and servicing, adding accessories and extensive cleaning.
Suitable for both workshops and home garages.
The table smoothly and safely lifts the motorcycle to an optimum height and position, maximising workshop and garage space.
Suitable for all types of motorcycles and scooters, front wheel locks into clamp, bike held stable by centre stand or paddock stand (not supplied).

Boxed Dimensions Length = 222cm height = 28cm width = 66cm

Use the BikeTek Motorcycle Centre Stand Workshop Mover to manoeuvre motorcycles with centre-stands where space is restricted.
Centre stand locates on the plate, 360º casters allow bike to be moved in any direction.
Complete with brake mechanism.
Ideal for workshop, display room and home garage use.

The Biketek Motorcycle or ATV Quad Ramp or Ramps are constructed from ultra lightweight aluminium, and utilising a unique folding design.
This Loading Ramp is perfect for loading motorcycles on/ off of trailers and transport vehicles.

BikeTek Motorcycle Paddock Stand Bobbin Hook Adaptors replace standard cup adaptors, allowing you to lift the bike by the bobbins instead of swing arms.

BikeTek Bobbins for use with Biketek Motorcycle Paddock Stands and bobbin hooks.
Please make sure your swing-arm has pre-tapped mounts.

Biketek Motorcycle Paddock Stand For Single Side Swing Arms are suitable for general maintenance and repair work. They are not intended for storage use. Side paddock stands utilise a locking adaptor pin which inserts and locks into the rear axle.

PDSVFR - Honda VFR

PDSNC - Honda NC30/RC30

PDSDUC - Ducati

PDSTRI - Triumph Daytona T595 >99, Daytona 955i >01

PDST01 - Triumph All Other Models including Sprint

PDSD40 - Ducati 1098 (not locking pin)

PDSD42 - MV Agusta F4/Brutale early Ducati 1098 (not locking pin)

The BikeTek Motorcycle Workshop Wheel Spinner allows front and rear wheels to be rotated for cleaning, tyre inflation and even chain lubricating.
The rollers utilise sealed bearings, distance between rollers can be adjusted for all sizes of tyre.
Galvanised finish.

The BikeTek Premium Motorcycle Mini Lift Jack is suitable for lifting motorcycles with a flat base or tubular frame, lifting from 100mm to 340mm.

The height and width adjustable cup supports can be added for for additional clearance of sumps.

The BikeTek Front Motorcycle Paddock Stand allows easy and safe lifting of front wheels for most motorcycle repair and maintenance jobs.
Extra heavy duty construction, these front stands are available in red finish, supplied with “under fork” adaptors as standard, one side is height adjustable.

The BikeTek Rear Motorcycle Paddock Stand allows easy and safe lifting of back wheels for most motorcycle repair and maintenance jobs.
Extra heavy duty construction, these rear stands are available in red or chrome finish, supplied with “cup” adaptors as standard.

The BikeTek Workshop or Showroom Motorcycle Mover Trolley allows a bike to be easily moved and positioned in confined spaces.
Load the motorcycle onto the strengthened plate, and rest the sidestand on the featured side plate. The mover can be pushed effortlessly into the required location.

This "Universal Bike Stand" allows you to store any bike in an upright position, eliminating the tilt from a side stand, you can store a number of bikes in a small area. Just wheel or ride your bike into position. No adjustment needed.

Dimensions: H38cm x W53cm x L66cm.

New to MotoGP comes this range of premium paddock stands. 1pc solid construction means that the stands are manufactured from uncut continuous tubing, supplied as a single ready-to-use stand - they are not a multipart product requiring assembly.

This superior production method minimises potential weakening and movement of the stand, as compared to a conventional multi-part paddock stand.

New to MotoGP comes this range of premium paddock stands. 1pc solid construction means that the stands are manufactured from uncut continuous tubing, supplied as a single ready-to-use stand - they are not a multipart product requiring assembly.

This superior production method minimises potential weakening and movement of the stand, as compared to a conventional multi-part paddock stand.

New to MotoGP comes this range of premium paddock stands. 1pc solid construction means that the stands are manufactured from uncut continuous tubing, supplied as a single ready-to-use stand - they are not a multipart product requiring assembly.

This superior production method minimises potential weakening and movement of the stand, as compared to a conventional multi-part paddock stand.

The tubular motorcycle wheel chock stand, supports front wheel of bike during storage and transit.

Fully adjustable to fit wheels 15" to 18"

The Oxford Heavy Duty Motorcycle Paddock Stand Front guarantees Maximum Support & Stability...
4 chunky wheels, massive 40mm tube. Ultra Strong Frame - adjusted to provide more leverage

For Maximum Support & Stability...
Specially designed rests, 4 chunky wheels, massive 40mm tube. Ultra Strong Frame - adjusted to provide more leverage

Now Includes Bobbin Fork Adaptors Free of Charge.

Oxford Magnimate Ultimate Motorcycle Magnetic Side Stand Support.

Integral magnet allows you to locate your stand safely on the MagniMate, first time, everytime!

Black version supplied

Oxford Motorcycle Paddock Stand Bobbin Adapter Forks are for use with the Oxford rear paddock stand when bobbin spools are fitted to your swing-arms.

Bobbins also available...

Oxford Bobbins for use with Oxford Motorcycle Paddock Stands and bobbin hooks.
Please make sure your swing-arm has pre-tapped mounts.
Please state bike year and model when ordering..

Oxford Paddock Stand Set Front and Rear *Now With Free Forks*
SAVE ON PRICE AND POSTAGE BY BUYING AS A PAIR

For Maximum Support & Stability...Ultra Strong Frame - adjusted to provide more leverage

Now Includes Bobbin Fork Adaptors Free of Charge.